您要查找的是不是：
- Each of your heart’s ventricles has an outlet valve. 每一側的心室都有一個出口瓣膜。
- Secure with locknut and gaskets. Install valve assembly. 用放松螺母和墊圈緊固。安裝閥門總成。
- Kit consists of: Relief Valve Assembly, RV Spring, and RV Cover O-ring. 組件包括：安全閥總成，安全閥彈簧，和安全閥閥蓋O形環。
- The outlet valves are to be blown out by the force of vapour. 出氣閥要靠蒸汽的力量沖開。
- To assemble the Relief Valve Assembly have a screwdriver ready. 準備好組裝安全閥總成的螺絲刀。
- Suzhou Tople Engine Parts Co.,Ltd. is a manufacturer specializing in producing inlet and outlet valve for automobile engine. 蘇州多譜路發動機零部件有限公司是一家外商獨資，專業生產汽車發動機進排氣門的生產廠家。
- The outlet valve of the plunger pump must be taken down before the inlet valve is hauled out with the former disassembling instrument for the valve. 柱塞泵的下凡爾損壞后,用原來配的凡爾拔出器拆卸時要先拆掉上凡爾,再拆卸維修下凡爾。
- Valve assembling: Place the ball into the body. 重組閥門：將球放入閥體。
- Closing the filtered water outlet valve and lowering of the water level in the filter by opening the washwater discharge valve. 關閉濾后水出口閥門，通過開啟沖洗水排放閥降低濾池內的液位。
- DOUBLE CHECK VALVE ASSEMBLY For Low Hazard Cross-connections and continuous pressure applications. 雙止回閥總成用于低危險交叉連接和持續壓力應用場合。
- Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke. 噴油泵柱塞及出油閥是否磨損或卡死、柱塞彈簧及出油閥彈簧是否折斷；
- NOTE: DO NOT USE A PIPE WRENCH TO REMOVE THE RELIEF VALVE ASSEMBLY FROM THE BACKFLOW PREVENTER. 注意:不要使用管鉗從防回流閥上拆卸安全閥總成。
- Seals should be in place on all top hatch covers and bottom outlet valves. 在頂部的開口處與底部的出口處應有密封條?
- All internal parts shall be accessible through a single cover on the valve assembly securely held in place by a two-bolt grooved coupling. 所有內部部件應該可以通過閥門總成上的一個閥蓋接近，這個閥蓋采用兩個螺栓槽聯結器固定。
- Remove the relief valve assembly (includes cover O-ring, stem and diaphragm assembly). 拆卸安全閥總成(包括閥蓋O形環,閥桿和隔膜總成)。
- Series 719 Double Check Valve Assembly shall be installed at each noted location. 系列719雙止回閥總成應該安裝在每個標注的位置上。
- Use an open-end wrench and open the locknut on the accumulator valve assembly two or threefull turns. 使用開口扳手，打開蓄能器閥門上的防松螺栓-----------。
- Novel,special and energy saving of Q/ HF7-1995 homoiothermal drain valve assembly. 新穎獨特節能的Q/HF7-1995恒溫疏水閥及閥組；
- Chemical delivery device 200 is basically comprised of a housing 210 having a valve assembly 410 disposed therein. 化學輸送裝置200基本上包含：一外殼210，其中有配置一閥組件410容納于其中。
- Standard features include:3” waste outlet valve, left side service,2” fresh water outlet valve, sight glasses, hose bracket, strap tie-down brackets, bumper hitch, rear mud-flaps, wand holster, unique baffle design, keyed locking cabinets. 標準系統包括:3"大小排污口閥,左邊服務系統,2"大小清水閥、鏡、管支架、牽制下拉支架、撞緩沖器、方泥瓣、皮套、特設計擋板、鎖壁柜。
