您要查找的是不是：
- Loosen the height locking screw and remove the arm from the turntable. 放松高度螺絲，將唱臂自唱盤取下。
- Unload the wind window 4, loosen the lock screw of nut 5. 卸下通風窗4后;松掉鎖緊螺母5上的鎖緊螺釘.
- Add oil on slip parts and axletree surfaces in switchgear (e.g valve, interlocking, guide system, screw mandrel machine and truck trolley and so on). 給開關柜內的滑動部分和軸承表面（如活門、聯鎖和導向系統、絲桿機構和手車滾輪等）上油。
- The bottom view of the rifle, no locking screws. 自裝槍的下方,無固定螺絲。
- Replace the arm on the turntable and tighten the height locking screw sufficiently to hold the arm in position. 將唱臂重新裝上，將高度螺絲鎖到可讓唱臂固定。
- Unscrew the carrier locking screw (item 2 in FIGURE 3-1) on the carrier handle (3. 鬆開托座把手上的托座鎖定螺絲(圖3-1中的項目2))。
- Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation. 在差速器安裝期間，安裝小齒輪配合軸鎖螺絲，用手緊固它，以把握住軸。
- The analytical results of femoral locking screw models were closely related to those of biomechanical tests with high correlation coefficient. 而生物力學實驗與有限元素模擬有不錯的相關系數，故可利用有限元素分析來準確預估生物力學測試結果。
- It is a special project to a permanent adhesive resin in the thread, have always solid, permanent use, absolute lock screw environmental products. 它是將特殊的工程樹脂永久地粘附在螺牙上，產生永遠牢固、永久使用、絕對環保的防松螺絲產品。
- In the following section, we review four mechanisms of locked plate failures: (1) plate bending; (2) plate fracture; (3)plate pull-off; and (4) locking screw failure. 在一下部分，我們將回顧鎖定鋼板失敗的四種機制：（1）鋼板彎曲（2）鋼板斷裂（3）鋼板脫出（4）鎖定螺釘固定失敗。
- X-ray evaluation demonstrated failure of the distal 2 locking screws with the heads sheared off (Figure 4). 線片現實內固定失敗，遠端2枚鎖定螺釘在剪力下于螺釘頭處折斷（圖4）。
- Stop Adjustment Screws as well as Locking Screws located in Body Adapter. This is external to Actuator Air Pressure Chamber. 止動調節螺絲也就是鎖定螺絲,位于主體接頭上。這是執行機構氣源壓力墻外的外部裝置。
- Manufacturing GB, ANSI and DIN machine screws, cap nuts, screw mandrels, threaded rods, eyelet bolts, eye bolts and other fasteners. 專業制造國標（GB）、美標（ANSI）、德標（DIN）等各類機螺絲、螺帽、絲桿、牙棒、地腳螺絲、羊眼、彎鉤等。
- They screwed the money out of her by threats. 他們威脅她把錢交出來。
- She had screwed up and had to do it all over again. 她把事情搞壞了，得重新做過。
- She screwed up her eyes in the bright light. 她在明亮的光線下瞇起了眼睛。
- We got screwed when we bought this house. 我們買這所房子上當了。
- He chiseled a hole in the door to fit a new lock. 他在門上鑿了個孔，以便裝一把新鎖。
- This lock can only be opened from the inside. 這把鎖只能從里面打開。
- I screwed up my courage and went to the dentist. 我鼓起勇氣去找牙科醫生。
