您要查找的是不是：
- Signaling Link Code = the member number within a link set. Signaling Link Code = 鏈路群內的成員號。
- The alternate link set must not be equal to the preferred link set. 交替鏈路群的值一定不能與首選鏈路群相等。
- A combined link set provides alternate paths between two SS7 nodes. 合并的鏈路群提供兩 SS7 節點之間的交替路徑。
- This value must be different from the other two link set values. 該值必須和其他兩個鏈路群的值不同。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 鏈路群內的成員號。
- Link Set = the link set to which this specific link belongs. Link Set = 該特定鏈路屬于的那個鏈路群。
- A link set may consist of up to 16 links. 一個鏈路群可能由 16 條鏈路組成。
- Preferred Link Set-the preferred link set is specified in this field. Preferred Link Set -- 在該字段指定首選的鏈路群。
- All 16 links can be assigned the same link set number. 全部16 條鏈路會(huì )分配到同一個鏈路群號碼。
- Link Set--this is a number identifying the link set to which this particular link belongs. Link Set -- 這是識別該特定鏈路所屬鏈路群的一個號碼。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set,this field must be set to 0. 對于沒有組合鏈路群的 STP 應用程序(比如 5ESS DCS)，必須將這個字段設置為 0。
- This value must be unique within a link set and must agree with information in the far end STP or 5ESS DCS. 在鏈路群中，該值必須是唯一的，而且必須與遠端 STP 或 5ESS DCS 上的信息一致。
- Link Set-this is a number identifying the link set to which this particular link belongs. Link Set -- 這是識別該特定鏈路所屬鏈路群的一個號碼。
- Alternate Link Set-the alternate link set to be used in routing flag (DLS_RTG) case. Alternate Link Set -- 交替鏈路群設置為用于路由標志為 (DLS_RTG) 的情況下。
- For non-STP applications (such as the 5ESS DCS) that do not have a combined link set, this field must be set to 0. 對于沒有組合鏈路群的 STP 應用程序（比如 5ESS dcs），必須將這個字段設置為 0。
- Alternate Link Set 裈he alternate link set to be used in routing flag (DLS_RTG) case. 交替鏈路群設置為用于路由標志為(DLS_RTG)的情況下。
- When a process terminates it sends an exit signal, either normal or non-normal, to the processes in its link set. 當一個進程終止的時候，它發出一個退出信號（不論是否正常退出）到和它鏈接在一起的所有進程。
- For all other clusters,the link set value should be the link set value that is entered on all instances of the s7ln or is7ln form. 對于所有的其他鏈路群值應該是在所有 s7ln 或 is7ln 表中所有實例中輸入的鏈路群值。
- The properties of the verb can be set declaratively in the form Property-Subproperty, where Subproperty is a property of the WebPartVerb object (for example, ConfigureVerb-Text). 該謂詞的這些屬性可以采用Property-Subproperty形式以聲明方式設置,其中Subproperty是WebPartVerb對象的屬性(例如,ConfigureVerb-Text)。
- Non-STP applications,including the 5ESS DCS,must not have a combined link set,and this field must be set to 0 in those cases. 對于非 STP 應用程序，包括 5ESS DCS，一定不能有組合鏈路值，且在那種情況下，該字段必須設置為
