您要查找的是不是：
- The laboratory exhaust system includes exhaust duct works, exhaust fan, laboratory fume hood exhaust, laboratory canopy hood and cabinets needed venting. 實驗室排氣系統包括排氣管路、氣風機、驗室通風柜管道、驗室排風罩和特殊存儲柜的排氣管道。
- Esco Laboratory Fume Hood - Frontier Duo; 生物安全柜:實驗室安全通風櫥;
- PROPOSED SPECIFICATION FOR CCIQ LABORATORY FUME HOOD WORKS CCIQ 實驗室通風柜工程
- This section sets out the design, fabricate, supply, delivery, installation, test and commission of the laboratory fume hoods (fume cupboards). 這一部分介紹了通風柜的設計、構造、材質、安裝、檢驗等內容。
- Influence of Air Supply to the Laboratory Fume Hood Air Flow Control 送風對實驗室排風柜氣流控制的影響
- 1 The laboratory exhaust system includes exhaust duct works, exhaust fan, laboratory fume hood exhaust, laboratory canopy hood and cabinets needed venting. 實驗室排氣系統包括排氣管路、排氣風機、實驗室通風柜管道、實驗室排風罩和特殊存儲柜的排氣管道。
- Bench-type fume hood is the main type in CCIQ laboratory. 臺式通風柜是CCIQ實驗室主要的通風柜。
- Fume hood should be provided in each regular chemical analysis laboratory. 每個常規化學分析室都要有通風櫥。
- Method of Testing Performance of Laboratory Fume Hoods 實驗室排煙罩性能測試方法
- Standard fume hood is of60 or72 inches width. 標準的通風柜一般60或者72英寸寬度。
- Plan View drawing of laboratory layout with caseworks and fume hood arrangement. 實驗室基本柜體、通風柜平面布置圖。
- The pump exhaust should lead to the open air or a fume hood. 抽氣泵的排氣管應該導向室外空曠處或導向一座通風櫥。
- Main products are laboratory furniture, fume hood, ESD workstation, storage cabinet, high purity gas distribution, etc. 氣路的設計和安裝；為您精心打造安全的、科學的、綠色的實驗室。
- States the significance of face velocity of VAV fume hood in modern laboratory, and states the principleand methods of face velocity control of VAV fume hood in detail. 論述了現代實驗室變風量排風柜罩面風速控制的意義,詳細闡述了排風柜罩面風速控制的原理和方法。
- Laboratory fume cupboards constitute an essential component for any laboratory, it can exhaust the harmful gas, particle, then protect the safety of staff in the lab. 通風柜是實驗室里最重要的設備之一;能有效的排除實驗室里的有害氣體;顆粒;保護實驗室工作人員的安全.
- Fume hood shall be designed to minimize static pressure loss. Bell shaped exhaust collar configuration shall be provided. 通風柜的設計要減少靜壓損失。因此一般在排氣口附件采用鐘型設計。
- The pipe of fume hood should upward through the roof. There should be water pipe and water sink in the fume hood. 通風柜，通風櫥的管道要通到屋頂，通風櫥內要有水管，水槽。
- The fume hood shall be tested in manufacturer's facilities in conformance with international standards such as ASHRAE110 for containment performance. 通風柜要經過生產廠家的檢驗，滿足ASHRAE110的剩余濃度標準。
- There shall be an instruction plate attached to the fume hood exterior. The instruction plate shall be constructed from corrosion resistant material. 通風柜外部需要有一個抗化學腐蝕的指示牌。
- The interior material inside Fume Hood should have authorization test certificate to ensure excellent chemical performance. 通風柜內襯材料需要有權威機關的證明，有良好的化學抗性。
