您要查找的是不是：
- Especially suitable for inert gas protection weld and gas cutting. 特別適用于惰性氣體保護焊及氣切割。
- It is not necessary to replace air with inert gas. 不必用惰性氣體置換空氣。
- Helium is a monatomic chemically inert gas. 它是單原子惰性氣體。
- The tube is blanketed in an inert gas such as nitrogen or argon. 管子被整個地漫浸在流動的氮或氬等惰性氣體中。
- Good gas cutting property and weldability. 不影響焊接和切割。
- Leak-test lines and equipment with an inert gas before using. 使用前用惰性氣體對管道和設備檢漏。
- Excellent gas cutting property and weldability. 優異的焊接性和切割性。
- Excellent gas cutting property and weld ability. 具有優異的焊接性能和切割性能。
- Helium and neon are inert gases. 氦和氖為惰性氣體。
- In pure inert gas arcs, the axial temperature may rise to 30000K. 而對于惰性氣體保護焊的電弧，其軸向最高溫度可達30000K。
- "He" is one of the six inert gasses. “氦”是六種惰性氣體之一。
- So unless you know the exact procedure for filling the tanks with either water or inert gas before you cut or weld on them, please avoid doing that. 因此如果你對于切割和焊接前需要用水或者惰性氣體填充罐子這種正確的工作程序不了解的話，請避免直接焊接或切割。
- Inert gas studies are providing valuable information about other planets, too. 對惰性氣體的研究，也提供了有關其它行星的有價值的資料。
- The complete measuring system is filled with an inert gas under pressure. 整個測量系統填充了加壓氣體。
- An inert gas such as argon is introduced to reduce evaporation of the filament. 將諸如氬那樣的惰性氣體充入燈泡中，以減少燈絲的蒸發。
- An empirical formula was given for determining the minimum inert gas flow rate. 給出了一個煤粉干燥工藝惰化設計的實例。
- It is only device to measure hemodynamic by the Inert Gas Rebreathing method. 唯一應用氣體再呼吸法技術檢測血流動力學及氧動力學的儀器.
- Is the inert Gas System fully operational and in good working order? 惰氣系統是否完全可用并處于良好的工作狀態？
- When propane gas cutting low-carbon steel plate, the cost varies with the thickness of the steel plate. 用于低碳鋼板氣割時，氣割成本隨板厚不同而變化。
