您要查找的是不是：
- Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc. 如：電弧焊、二氧化碳氣體保護焊、氬弧焊等各種焊接。
- Electric arc shape of twin-wire indirect arc welding 雙絲間接電弧焊的電弧形態
- Electric arc welding should not be carried out on equipment suspended from a crane because of the risk of damage to lifting wires from uncontrolled stray currents. 不應在懸掛于起重機下的設備上進行電弧焊接，否則有未經控制的雜散電流損壞吊索的危險。
- For electric arc welding in a space with conductive walls or floors, the welder should be provided with an insulating mat or cradle to avoid bodily contact with the walls. 在安裝有傳導性墻壁或地板的空間進行電弧焊接時，應向焊工提供絕緣墊或支架以避免人體接觸到墻壁。
- Manual electric arc welding runways for cranes 手工電弧焊接起重機運行軌道
- Lightweight electric arc welding machine 輕便型電弧焊機
- Lightweight electric arc welding rectifier 輕便型弧焊整流器
- shielded metal manual electric arc welding 手弧焊
- Manual electric arc welding technology for oblique sprocket tooth 斜斗鏈輪輪齒的手工電弧堆焊工藝
- Photographing and Dynamical Dealing in Electric Arc Welding Process 電弧焊過程的圖像拍攝和動態處理
- The stick of carbon is often used in an electric arc lamp. 碳精棒常用于電弧燈。
- Study and Application of Electric Arc Welding Method for Jointless Groove Rail 無縫線路槽型軌電弧焊方法研究及應用
- Essentials for Weld-repairing Cast Iron Part with Manual Electric Arc Welding 手工電弧焊焊補鑄鐵件的要點
- Keywords thyristors;electric arc welding;microcomputers;control system; 晶閘管;電弧焊;微型計算機;控制系統;
- With high speed camcorder system and digital oscillogragh,the electic arc shape of twin-wire indirect arc welding was investigated. 用高速攝像系統及示波器對雙絲間接電弧氣體保護焊的電弧形態進行了研究。
- Electric arc with pushing force, stable current. 電弧帶推力,電流穩定;
- Manual Electric Arc Welding of the Online Leak Sealing with Draining for Pressure Equipment 承壓設備的帶壓引流焊接密封
- Most electrocution is caused by load-side power source and most types of electrocution are the indirect electric shocks induced by the voltage of 220V. 感電災害源以配電箱至負載間臨時電源產生之災害最多；觸電型態以220V電壓之間接觸電最多；
- The technology of sealing up vessel and pipe under pressure by manual electric arc welding 壓力容器及管道的手工電弧焊帶壓補漏操作技術
- Keywords inverters;electric arc welding;welding machines;output characteristic control; 逆變器;電弧焊;焊機;外特性控制;
