您要查找的是不是：
- Selected Papers on Crack Tip Stress Fields 裂縫頂端壓力領域研究論文集
- Results show that the development of creep makes the crack tip stress singularity in the weld and the driving force for crack growth increased. 結果表明在外載恒定的情況下，蠕變的發展會(huì )使焊縫裂尖的應力奇性增加，裂紋擴展的驅動力增大。
- The stress field of crack tips of linear elastic orthotropic composite plates under the acts of bending and torque is analyzed. 摘要對受彎矩、扭矩混合作用的線彈性正交異性復合材料板的裂紋尖端應力場進行探討。
- Stress field around crack tip inside thin current-carrying plate 具有中間穿透裂紋載流薄板裂紋前緣的應力場
- Crack tip stress triaxiality in welded joints 焊接接頭中的裂端應力三軸性
- DYNAMIC STRESS FIELD AROUND THE CRACK TIP IN A FUNCTIONALLY GRADED MATERIAL 功能梯度材料裂紋尖端動態應力場
- The Calculation of the Crack Tip Stress Intensity Factor Sections 型材中裂紋應力強度因子計算方法
- STRESS FIELD AROUND THE ANTIPLANE CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL 正交各向異性功能梯度材料反平面裂紋尖端應力場
- Numerical Simulation of Temperature Field and Thermal Stress Field on Crack Tip in Metal 金屬材料裂紋尖端溫度場和熱應力場的數值模擬
- Anisotropic Plastic Stress Fields at a Slowly Propagating Crack Tip 緩慢擴展裂紋尖端的各向異性塑性應力場
- Effect of Creep on the Crack Tip Stress Singularity in the Weld of PE 80 Pipe 蠕變對PE80管材焊縫裂尖應力奇性的影響
- Keywords Digital Image Correlation Method（DICM）;Micro zone strain measurement;Interface crack;Stress field ahead of interface crack tip; 數字相關;微區應變測量;界面裂紋;裂尖近區應力;
- STRESS FIELD AROUND CRACK TIPS IN A THIN CURRENT-CARRYING PLATE 載流薄板內裂尖附近的應力場
- The asymptotic analysis of he stress and strain field at a propagating crack tip is given by means of an elastic-viscoplastic model. 摘要 本文采用一種彈性/粘塑性模型,對擴展裂紋尖端應力應變場進行了漸近分析。文中假定,彈性階段的粘性效應可以略去,僅在塑性應變中粘性才起作用。
- The strain field ahead of a stationary crack tip with plane stress deformation in ductile metal was measured with SEM, by micro grid method and digital image processing. 用顯微網格數字圖系處理方法，測量了韌性材料平面應力條件下互型單邊裂紋尖端附近的應變場。
- However, for the specimen that has a sharp notch close to an ideal crack, the measured fracture toughness is not sensitive to the specimen geometry. 尖槽切口接近理想裂紋，裂紋起裂始于尖角的頂點，實測的斷裂韌度不存在尺寸相關性，即是材料常數。
- In this development only a single crack tip has been considered. 在這個研究中只是考慮了單個裂紋尖端。
- WHY IT IS NOT APPROPRIATE TO USE FORMULAS OF CRACK TIP STRESSES WITHOUT RESTRICTION 為什么不加限制地使用裂紋尖端應力公式是不恰當的
- STRESS FIELD AROUND CRACK TIPS IN A CURRENT-CARRYING PLATE WHILE THE CURRENT IS SWITCHED ON 電流通入瞬間導電板內裂尖附近的應力場
- They also noted "scattering zone" was very near to the crack tip. 它們還表明：“離散區”非常接近裂紋頂端。
