您要查找的是不是：
- Five technical processes of PET high|speed melt spinning, namely, MG, H4S, TCS, HCS and SHSS, were summarized. 綜述了 PET高速紡絲熱輥法生產工藝 (MG)、冷輥拉伸蒸汽定型法生產工藝 (H 4S)、熱管法生產工藝 (TCS)、熱管拉伸法生產工藝 (HCS)以及超高速紡絲工藝 (SHSS) ;
- The shaped silicon carbide fibers were prep ared from polycarbosilane by melt spinning,curing treatment and sinterin g. 以聚碳硅烷為原料,通過熔融紡絲、不熔化處理、燒成,制備出了具有異型截面的碳化硅纖維。
- Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y shaped spinnerret. 以聚碳硅烷(PCS)為原料,經不熔化和燒成制得三葉型碳化硅纖維。
- Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y-shaped spinnerret. 以聚碳硅烷（PCS）為原料，經不熔化和燒成制得三葉型碳化硅纖維。
- Microporous polypropylene hollow fiber membranes were prepared by the melt spinning and cold-drawing method. 通過熔紡/冷拉伸法制備了微孔聚丙烯中空纖維膜。
- Trilobal polycarbosilane(PCS) fibers were prepared by melt spinning PCS precursor through Y shaped spinneret. 以聚碳硅烷(PCS)為原料,采用熔融紡絲制備三葉型PCS纖維后,經不熔化和燒成制得三葉型碳化硅纖維。
- The Sm(Co0.74CuxFe0.1Zr0.04)8(x=0,0.1, 0. 12,0. 16)ribbons with different Cu contents have been prepared by single roller melt spinning in Ar gas. 在氬氣保護下用單輥熔體快淬法制備了不同Cu含量的Sm(Co0.;74CuxFe0
- Polypropylene granulate add master batch of disperse dyes as raw to make dyed mo dified polypropylene fiber by polyblending melt spinning method. 以聚丙烯切片及添加分散染料的可染母粒為原料,采用共混熔融紡絲方法制備染色改性丙綸。
- The elastic recovery of melt-spun spandex can be improved by melt spinning self-made terminated polyurethane pre-polymer and spandex resin. 采用自制的封端型聚氨酯預取體與氨綸樹脂熔融紡絲,可改善氨綸彈性恢復率。
- By trilobal spinning subassembly, the shaped polycarbosilane fibers were prepared from polycarbosilane by melt spinning. 以聚碳硅烷為原料，運用三葉型紡絲組件，通過熔融紡絲，制備出了異型截面聚碳硅烷纖維。
- Application of non polyurethane,polyester polyurethane,polyether polyurethane and chain extender on the melt spinning of elastic fiber is introduced . 介紹了非聚氨酯類、聚酯型聚氨酯類、聚醚型聚氨酯類聚合物及擴鏈劑在熔紡彈性纖維上的應用。
- The ribbon formation process and the technological parameters affecting the quality of melt spinning NiAl intermetallics were investigated. 摘要研究了金屬間化合物快速凝固薄帶的成型過程和影響薄帶質量的工藝參數。
- We briefly describes the preparing and properties of the non- plasticate melt spinning PAN fibers as well as the resin that it made from. 綜述了聚丙烯腈纖維的熔融紡絲工藝 ,主要介紹了非增塑融紡的聚丙烯腈樹脂及纖維的制備方法和性質。
- The research progress in the solution spinning and melt spinning of biodegradable poly(lactic acid) (PLA) fiber was reviewed and the fibers properties as well. 綜述了可生物降解聚乳酸纖維的溶液紡絲和熔融紡絲成形的研究進展，以及聚乳酸纖維的性能。
- The molecular sieve modified PET fiber was prepared by blending and melt spinning PET chip with molecular sieve and additives,like dispersant,cross linker,at different ratios. 將分子篩、添加劑(分散劑、交聯劑)以不同的比例和PET切片共混進行母粒法熔融紡絲,制得分子篩改性PET纖維,并測定纖維的力學性能、吸濕性能和染色性能。
- A kind of high strength and high modulus fiber was prepared by melt spinning and drawing of high molecular weight polyethylene (HMWPE) plasticized by wax. 采用石蠟增塑高相對分子質量PE后紡絲并經高倍拉伸制備高強高模纖維。
- The research progress in the solution spinning and melt spinning of biodegradable poly(lactic acid) (PLA) fiber was reviewed and the fiber's properties as well. 綜述了可生物降解聚乳酸纖維的溶液紡絲和熔融紡絲成形的研究進展,以及聚乳酸纖維的性能。
- This paper is mainly concentrated on the introduction to prepare PAN based carbon fibers and their special fabrication method from a melt spinning to prepare the precursor fibers. 筆者主要介紹了聚丙烯腈基碳纖維的制備工藝概況,特別介紹了熔融紡絲路線制備聚丙烯腈原絲的方法。
- The quenching equipment,quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced. 介紹了熔融紡絲的吹風冷卻裝置、吹風技術及熔紡冷卻過程的計算機模擬研究的新進展。
- Mesophase pitch was melt spun into hollow,ribbon shaped and Y shaped fibers. 利用中間相瀝青熔融紡絲法，制得中空、條形、Y形等異形纖維，介紹了異形瀝青纖維的紡絲特點。
