您要查找的是不是：
- fuel control valve 燃料控制閥
- Wuxi ChengXin Auto Control Valve Co., Ltd. 無錫市誠信自控閥門有限公司。
- Rethink your control valve maintenance. 采用新的診斷工具提高控制閥維修的可靠性。
- The APU fuel system consist of a fuel valve, control unit, solenoid valve, f ilter, heater and control valve. APU燃油系統包括一個燃油活門、控制組件、電磁活門油濾、加熱器及控制活門。
- Secure with locknut and gaskets. Install valve assembly. 用放松螺母和墊圈緊固。安裝閥門總成。
- Automatic control valve(s) shall be fluid actuated and have a single moving assembly. 自動控制閥應該是流體驅動的，并且只有一個活動部件。
- WZA-RF11/12 series temperature control valve, applicable for fuel gas oven, fuel gas boiler and weztern style kitchen, constant open flam fuel gas temperature control valve. 12系列溫控閥，適用于燃氣烤爐、燃氣炸鍋、西廚設備用常明火燃氣溫控閥。
- Kit consists of: Relief Valve Assembly, RV Spring, and RV Cover O-ring. 組件包括：安全閥總成，安全閥彈簧，和安全閥閥蓋O形環。
- To assemble the Relief Valve Assembly have a screwdriver ready. 準備好組裝安全閥總成的螺絲刀。
- A Graphical Method for compensation of control Valve Performance. 控制閥特性補償的圖解方法。
- Control valve in an air system for setting volume and pressure. 為了保持流量和壓力的空氣系統的控制閥門。
- The fuel control unit supplies and regulates the fuel to the combustion chamber. 燃油控制組件對進入燃燒室的燃油進行調節。
- Ability of extension for remote control or flow control valve. 可擴充發展成遠程控制，或流量控制設備。
- Manifolds can be added to a control valve sealing device. 可以給閥組加一個閥的密封控制裝置。
- Valve assembling: Place the ball into the body. 重組閥門：將球放入閥體。
- In 2007, FIT developed Flexible Fuel Control System has been applied in methanol dual fuel control system by Shanghai Huapu Autos. 2007年成功開發靈活燃料控制系統平臺，并批量應用于上海華普汽油甲醇雙燃料控制系統。
- DOUBLE CHECK VALVE ASSEMBLY For Low Hazard Cross-connections and continuous pressure applications. 雙止回閥總成用于低危險交叉連接和持續壓力應用場合。
- When a load is applied to the APU, the fuel control unit meters the fuel flow to maintain a near constant speed and a safe operating temperature of the unit. 當一個負載被加到APU上時，燃油控制組件測量燃油量以保持一個相近的恒定速度及組件的安全溫度。
- NOTE: DO NOT USE A PIPE WRENCH TO REMOVE THE RELIEF VALVE ASSEMBLY FROM THE BACKFLOW PREVENTER. 注意:不要使用管鉗從防回流閥上拆卸安全閥總成。
- All internal parts shall be accessible through a single cover on the valve assembly securely held in place by a two-bolt grooved coupling. 所有內部部件應該可以通過閥門總成上的一個閥蓋接近，這個閥蓋采用兩個螺栓槽聯結器固定。
