您要查找的是不是：
- ABS is a stock capital blend method backed by the asset of the project. abs是以項目所屬的資產為支撐的證券化融資方式。
- The effects of blending method on the morphology and properties of HDPE/PC blend were studied. 研究了不同共混方式對高密度聚乙烯（HDPE）／聚碳酸酯（PC）共混體系形態與性能的影響。
- Blur Blending Method - This sample shows a way to code the blur blending method on a RGB bitmap. Use it for a smooth effect or to remove noise. 模糊混合方法這個例子描述了在RGB位圖中使用模糊混合方法的途徑。使用它可產生柔化效果或者去處噪音。
- It prepared LDPE/nano-CaCO 3 film by means of melt blending method,and studied the mechanical proper-ties of modified film. 采用熔融共混的方法制備了低密度聚乙烯(LDPE)/納米CaCO3薄膜,并著重對改性膜的力學性能進行了研究。
- The polyhedral oligomeric silsesquioxane/silicone rubber composite was prepared by melt blending method through Haake inner mixer. 采用熔體共混法制備了籠型硅氧烷齊聚物(POSS)/硅橡膠復合材料。
- In comparison with in-situ polymerization, more homogeneous hybrids with monodispersion of titania were synthesized by blending method. 同原位聚合法相比，共混法可制備出更均勻的雜化體系，且TiO2為單分散。
- The chlorosulfonated polyethylene(CSM)/SBR blend with interpenetrating network(IPN) was prepared with the mechanical blending method. 用機械共混法制備了具有互穿聚合物網絡(luò )（IPN）結構的氯磺化聚乙烯（CSM）/SBR共混物。
- The graphitized carbon black/chlorinated butyl rubber composites were prepared by blending method and their tensile,conductive and dielectric properties were characterized. 通過共混法制備了導電炭黑/氯化丁基橡膠復合材料,研究了復合材料的拉伸性能與導電、介電性能。
- In this paper, (PPC)/organoPHilic montmorillonite (OMMT) and (PPC)/organoPHilic rectorite (OREC) nanocomposites were prepared by a melt blending method . 關于PPC/層狀硅酸鹽納米復合材料的老化和降解的研究尚未見報道。
- SPES/PSF ultrafiltration membrane was successfully prepared by the blend method, with sulfonated polyethersulfone (SPES) and polysulfone (PSF) as membrane material. 摘要 以磺化聚醚砜(SPES)和聚砜（PSF）為膜材料，用共混法制備了SPES/PSF超濾膜。
- The production methods of health wine included lixiviating method, fermenting method, and blending method. 摘要保健酒制作方法可分為浸提法、釀制法、配制法。
- In this dissertation, the planar shape blending algorithm based on visual feature is proposed, and the 2D Character Animation Blending method based on this algorithm is presented, which can deal with shapes composed of several closed regions. 本文在分析和比較已有的二維多邊形形體漸變算法的基礎上,提出了基于視覺特征的平面形體的漸變方法,并在此基礎上給出了一個2D角色動畫變形方法,可以實現包含多區域的形體的變形。
- The result shows that in accordance with the relationship between ash composition and fusibility,the fusibility of coal ash can be controlld and modifipd by using coal blending method. 結果表明，利用煤灰熔融溫度的變化規律，采用配煤方法可以改變和控制煤灰的熔融溫度，達到煤的最佳利用效果。
- A submicrometer-graphite/HNBR composite was prepared by mechanical blending method,and the effects of the addition level of submicrometer-graphite on the properties of the composite were investigated. 采用機械共混法制備超細石墨/氫化丁腈橡膠(HNBR)復合材料,研究超細石墨用量對超細石墨/HNBR復合材料性能的影響。
- Both solution blending and mechanicle blending methods were used to prepared the Eu(TTA)2(phen)(MA)/SiR composites. 對于Eu(TTA)2(phen)(MA)/SiR復合材料，我們采取溶液共混法以及機械共混法制備相應的復合材料，在使用機械共混法制備復合材料時，我們重點考察了共混溫度對材料性能的影響。
- As far as dyeability improvement was concerned, blending method was the most feasible.PP dyeable by acid dyes would be a hot development point as well as the development of speciality fibers. 在染色性改善方面，以共混改性法最為可行，尤以酸性染料可染聚丙烯纖維為今后研究的熱點。
- The SBR/kaolin nanocomposites prepared with melt blending method had the similar mechanical properties and better thermostability compared with the rubber reinforced by silica white. 熔融共混法制備的復合材料的力學性能基本接近白炭黑填充橡膠，其熱穩定性能明顯優于白炭黑填充橡膠。
- A free flow of water came from the pipe. 水從管道里通暢地流了出來。
- This paper introduces the SEAM aggregates blending methods,blending ratio of identifying and SEAM asphalt mixture construction process. 介紹SEAM粒料的摻配方法、摻配比例的確定和SEAM瀝青混合料的施工工藝。
- In convection, hot currents flow upwards. 在對流中熱氣流向上運動。
