您要查找的是不是：
- Direction of fanner pass in and out is located in on an axes, enter, exit flange diameter is identical. 透風機進岀目標處于一點軸線上,進、岀口法蘭口徑一樣。
- Suction piping for all pumps shall have at least five(5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle. 所有水泵的吸水管道直徑至少應有5倍于吸入口的上升直水管段的額定邊緣直徑。
- Suction piping for all pumps shall have at least five (5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle. 所有水泵的吸水管道直徑至少應有5倍于吸入口的上升直水管段的額定邊緣直徑。
- When used with a "raised face" flange, there will be a gap between the faces on the outer flange diameters. 如果使用“凸面”法蘭，則在外法蘭直徑表面之間將會(huì )有間隙。
- Corresponding sizes of class 150 (aNSI B16.24) flange diameters and drilling templates are the same as those of the american Class 125 Cast Iron Flange Standard (aNSI B16.1) and of the american Class 150 Steel Flange Standard (aNSI B16.5). 與150磅級(美國國家標準協會(huì ) ansi B16.;24)法蘭直徑相對應的尺寸和鉆孔模板;其大小和形狀與美國125磅級鑄鐵法蘭ansi B16
- Hub Flange - spoke hole diameter. 軸皮上穿輻條的孔的圓心所在圓的直徑。
- This lens can magnify 20 diameter. 這個透鏡能放大20倍。
- The diameter of the tree-trunk is about 2 meters. 這樹干的直徑大約是2米。
- The axis of a circle is its diameter. 圓的軸線是其直徑。
- Measure the diameter of this circle. 量一下這圓的直徑。
- We must gauge the diameter of wire first. 我們必須先測量電線的直徑。
- A tube with a very small internal diameter. 毛細管一根內徑十分細小的管子
- Only one set of flange studs is needed. 只需要一套法蘭柱頭螺栓。
- outlet flange diameter 出口法蘭直徑
- inlet flange diameter 進口法蘭直徑
- These include gusset plates welded to the flange. 這些包括焊接到翼緣上的節點板。
- Using thread or flange capillary connection. 采用螺紋或法蘭毛細管聯接。
- Press the flange and replace the side sealing ring. 壓緊法蘭（均勻用力）更換側密封圈。
- The pond has a diameter of three hundred metres. 這池塘直徑有三百米。
- A circle is bisected by any diameter. 圓被任一直徑二等分。
