您要查找的是不是：
- Press the flange and replace the side sealing ring. 壓緊法蘭（均勻用力）更換側密封圈。
- bell and spigot bend 承插式彎管
- Export the valve,flange and fittings. 另常年出口閥門及配件。
- With bell and spigot joint, convenience for installation . 設計采用承插式的連接方式，方便安裝連接。
- Carefully lever up sender flange and raise it slightly. 小心地在寄件人凸圓上面撬開而且些微地升起它。
- Outer ring with integral central flange and two loose flange rings. 外圈帶整體式中心法蘭和兩個松配合法蘭圈。
- With sulfuration metal flange and asbestos covering layer. 連端硫化金屬法蘭,外有石棉保護層。
- USE THIS VALVE ONLY WITH FLAT FACE FLANGE AND FULL FACE GASKET. 這種閥門只能與平面法蘭和全工作面墊圈配合使用。
- One integral flange and one loose flange ring on the inner ring. 內圈帶一個整體式法蘭和一個松配合法蘭圈。
- The bell and spigot ends are normally jointed by using a rubber ring gasket. 鐘型和套管末端通常用橡膠圈接口。
- But almost any pressure water system should have a freshwater and/or saltwater manual pump and spigot as backup. 但是，幾乎任何壓力水系統都應該有一個淡水和/或海水手動泵和作為備用的套管。
- The frame shall be extruded aluminum with an integral anchor flange and seat. 框架采用壓制鋁材,配置整體錨固法蘭和基座。
- All nozzle flange and girth flange bolts shall be of stud bolt type. 所有設備口法蘭及翼緣法蘭螺栓應為雙頭螺栓。
- The initial retrofit consisted of removing the gaps between the stringer flange and floor beam by providing shims. 最初的修復工作是通過墊片來消除縱梁翼緣和橫梁之間的間隙。
- Soon the truck come into sight around a bend and on an upgrade. 不一會(huì )卡車就出現在一個拐彎和上坡處。
- Cracks have been found in the flange and web splices at groove welds in at least four bridges. 至少在四座橋梁的翼緣板和腹板拼接坡口焊縫中發現了裂紋。
- All parts of the heat exchanger composed by detachable bell and spigot joints, which result in simple tube replacement and easy maintenance.The price of the equipment is only 1/10 of imports. 設備全部采用承插式活連接,換管簡單,維修方便,其價格僅為國外進口價的1/10。
- The train went round the bend and soon got of sight. 火車轉過彎道很快就看不見了。
- Position the drip rail molding with clips at the roof flange and force the clips onto the roof flange. 用夾子將擋水條嵌條放置在車頂凸緣處并且用力使夾子固定到車頂凸緣上。
- Two outer rings each with a central integral flange and two loose flange ring; one intermediate rings. 兩個外圈分別帶一個中心整體式法蘭和兩個松配合法蘭環;一個隔圈。
