您要查找的是不是：
- The filament winding is one of the most important methods of the resin based composites modeling,while the tension control is the key problem of the winding technology,during the winding process. 纖維纏繞是目前樹脂基復合材料成型的最主要工藝手段之一,而纏繞過程中,張力的控制是纏繞技術的關鍵所在。
- A design method for linetype of elbow for filament winding is presented. 提出了一種彎管纏繞線型的設計方法。
- The article studies the theory of continued fractions and describes filament winding patterns. 本文用連分數理論研究并解釋纖維纏繞線型。
- According to filament winding process, a composite flywheel rotor laminated winding process was approved. 其次，結合復合材料纏繞成型工藝，進行了復合材料儲能飛輪分層結構的工藝設計。
- The tension control is the key technique in the filament winding process to guarantee the product quality. 纖維纏繞中張力的控制是關系到產品質量的關鍵技術。
- The filament winding pattern of the composite tube, winding parameters and undulation degree are studied in this paper. 本文介紹纖維纏繞復合材料管件的圖型形成過程 ,并研究了影響圖型的參數及纖維波動程度的計算。
- These will provide good basis for the investigation of multidirectional filament winding machine with more perfect function. 這些將為開發功能更完備的大型多向纖維纏繞機械提供很好的實踐基礎。
- This will provide a sound theoretical basis for the structural design and process design of prefabricated piece of multidirectional filament winding. 為多向纖維纏繞預制件的結構設計、工藝設計提供很好的理論基礎。
- Applying CAD/CAM technology to filament winding process can promote manufacturing efficiency, reduce design cost and shorten design period. 本文介紹纖維纏繞復合材料管件的圖型形成過程 ,并研究了影響圖型的參數及纖維波動程度的計算。
- This paper introduces the shielding theory of electrical equipment and its importance to the computer controlled filament winding machine. 研究了電氣設備的接地原理以及接地對于計算機控制纏繞機的重要性;
- Based on an analysis of the filament winding pattern and filament undulation,a new method for calculating the elastic modulus of filament winding composites is presented. 層板區域用經典層板理論計算彈性模量;纖維束波動區域根據纖維波動的細觀圖形及走勢計算彈性模量。
- The products are suitable for all kinds of FRP process, such as handing lay-up, Filament winding, molding process.Centrifugally cast filled process. mechanical process, etc. 應用：短切原絲氈主要應用于手糊成型，模壓成型，離心澆鑄成型,機械成型等玻璃鋼成型纏繞工藝。
- The technological requirement,interface treatment technique,filament winding technology and quality control of FRP/plastics composite pipe are introduced in this paper. 本文主要介紹了FRP／塑料復合管道工藝技術要求、界面層處理技術、纖維纏繞成型工藝及質量控制。
- Filament winding is a production technique for composite structures, in which impregnated fiber bundles are guided through a pay-out eye on a rotating mandrel. 纖維纏繞是一種制造復合材料產品的加工技術，預浸有樹脂的連續纖維束在吐絲嘴控制下沿規定路徑鋪設在芯模上。
- In filament wound pressure vessels, the strength of fibers can not be sufficiently utilized. 摘要纖維的強度性能在纖維纏繞壓力容器中不可能得到百分之百的發揮。
- Composite plate and shell with rubber liners can analogize real filament wound pressure vessels. 配橡膠內襯的復合材料板殼可以模擬真實纖維纏繞壓力容器。
- Composite plate and shell with rubber liner can simulate filament wound pressure vessels of the aircraft. 配橡膠內襯的復合材料板殼可以模擬宇航飛行器的纖維纏繞壓力容器。
- A filament wound inner pressure vessel with an inner metal bladder is analysed by a theory of laminated thin shell. 對于帶金屬內襯的纖維纏繞內壓容器，采用疊層薄殼理論進行了分析。
- The biaxial fatigue performance of a filament wound composite pipe has been investigated. 摘要對纖維纏繞復合材料管道的雙軸疲勞行為進行了實驗與理論研究。
- The wind was whispering in the trees. 一陣風穿過樹林沙沙作響。
