您要查找的是不是：
- Taper of bore in spindle center sleeve morse No. 主軸套內孔錐度。
- Taper of hole in spindle nose MT No. 主軸錐孔錐度。
- Taper of hob arbor fitting Morse no. 主軸錐孔。
- Caution: Do not weld any part of spindle! 注意：不要在機軸任何部位進行焊接！
- Front taper of spindle bore 主軸孔錐徑
- Elsewhere the token of sin, it was the taper of the sick chamber. 那字母本來是罪惡的標記，此時在病室中卻成了一支燭光。
- Mm Taper of spindle bore 主軸內孔錐度
- taper of spindle bore 主軸內孔錐度
- taper of spindle nose 主軸頭部形式
- A case of spindle cell hemangioendothelioma is reported. 報告1例梭形細胞血管內皮瘤。
- For connecting the different type of spindle of drill with the drill bits. 用于不同型號鉆機的主軸與鉆頭的聯接。
- He is just listening in external of that room. 他正在那房間的外面留神聽著。
- Flame hardening of spindle taper bore 主軸內錐孔火焰淬火
- The taper of elevators is usually slight, and the difference between the two values is generally small. 升降舵的根梢比通常較小，因而兩個值之間的差別一般不大。
- But stubble lacks the finer taper of unshaven hair, giving the impression of coarseness. 但是，未刮凈的汗毛茬會(huì )給人以粗糙的感覺。
- It is significant to improve the performance of spindle and spinning by studying the spindle axis orbit of vibration. 對錠子軸心振動軌跡進行研究,對提高錠子的性能及紡紗質量有重大的意義。
- The cut depth of smooth zone reduces, whereas the kerf taper of smooth zone first reduces and then increses when the standoff enhances. 切割速度增加時，光滑區切割深度減小，而光滑區錐度增大，切口的加工質量變差；切割半徑減小時，光滑區切割深度增大，而光滑區錐度減小。
- How can I persuade you of my sincerity? 我如何能夠讓你相信我的誠意？
- The effects of structure of the coils and taper of the amplifier on the green density and sintered density of ceramic powder PZT were analyzed. 分析了線圈匝數和放大器錐角等因素對壓坯和制品致密度的影響。
- Histology showed 1 case of spindle cell type A, 1 of spindle cell B, 10 of epithelioid cell and 7 cases of mixed cell type. 病理組識型：紡綞A型1例，紡綞B型1例，類上皮型10例，混合型7例。
