您要查找的是不是:
- Tests the thermodynamic performance of a Stirling cogeneration device with smoke waste heat recovery device. 測試了一臺帶有煙氣余熱回收裝置的斯特林熱電聯產裝置的熱力性能。
- This chapter will review the types of heat recovery devices available to industry. 本章將討論適用于工業部門的各種熱回收裝置。
- Experiment on heat pumps with exhaust heat recovery from kitchens 廚房排氣廢熱回收熱泵的試驗研究
- The new method of exhaust heat recovery on Consteel electric arc furnace 康斯迪電弧爐余熱利用的新方法
- Study on Absorption Refrigeration Cycle with an Exhaust Heat Recovery Generator 帶排煙熱回收發生器的直燃機制冷循環研究
- Keywords Consteel electric arc furnace vaporized cooling exhaust heat recovery; 康斯迪電弧爐;汽化冷卻;顯熱回收;
- The Pipe Heat Recovery Device for 20T milk/D Spray drying Tomer 20噸/日處理鮮奶噴霧干燥塔熱管式余熱回收裝置
- Closed hood, air exhaust and exhaust heat recovery system, pocket air supply system, workshop ventilation system 密閉氣罩、排風及排風余熱回收系統、袋區送風系統、造紙車間通風系統
- DYNAMIC STUDY OF THE EXHAUST HEAT RECOVERY SYSTEM FOR A GAS ENGINE-DRIVEN HEAT PUMP 燃氣機熱泵排煙余熱回收系統的動態特性研究
- Thermodynamic cycle of exhaust heat recovery turbine and methanol decomposition fueled ICE combination 廢熱裂解甲醇內燃機復合循環研究
- Thermodynamic cycle of exhaust heat recovery turbineand methanol decomposition fueled ICE combination 廢熱裂解甲醇內燃機復合循環研究
- Closed hood of left and right hand paper machine, air exhaust and exhaust heat recovery system, pocket air supply system 左右手機密閉氣罩、排風及排風余熱回收系統、袋區送風系統
- The purpose of this study is to investigate the effect of heat recovery system by redirecting the exhaust air through a mechanism device in a hot air dryer. 試驗結果顯示熱能回收裝置可將進氣溫度從大氣溫度(約32℃)提升到42℃,以溫度為基準的效能評估,研制的的熱能回收效能可達65%25以上。
- Remove exhaust heat shield from down pipe. 從下行管拆卸排氣隔熱罩。
- Physical and chemical tests verify that this Recovery Device has neither radioactive pollution nor toxic side effects. 經理化檢驗證實:使用該器無放射性污染,對人體絕對無毒無副作用。
- exhaust heat recovery cycle 排氣加熱恢復周期
- exhaust heat recovery boiler 廢熱鍋爐
- exhaust heat recovery 廢熱利用
- waste heat recovery device 余熱回收裝置
- Install exhaust heat shield, tighten bolts to 11 N·m. 安裝排氣隔熱罩,擰緊螺栓到11 N·m。