您要查找的是不是：
- The Snort process should have captured the three ICMP Echo Request packets and their full payload. 鼻息程序應該要捕獲三聲 ICMP 回聲請求儲存器和他們的完整負載量的。
- The ICMP echo request failed because the packet was divided into fragments for transmission and all of the fragments were not received within the time allotted for reassembly. 由于數據包被分割為片段以便傳輸,但在分配的時間內未收到所有片段以進行重組,ICMP回送請求失敗。
- The ICMP echo request failed because of a hardware error. 由于硬件錯誤,ICMP回送請求失敗。
- Invalid format of configuration validation request packet! 配置生效請求報文格式錯誤！
- The ICMP echo request failed because of an ICMP protocol error. 由于ICMP協議錯誤,ICMP回送請求失敗。
- Chapter 6, "Plug and Play for Function Drivers ," concerns just one type of I/O request packet, namely IRP_MJ_PNP. 第六章，“即插即用”，僅涉及到一種類型的I/O請求包，即IRP_MJ_PNP。
- The ICMP echo request failed because contact with the destination computer is administratively prohibited. 由于管理員禁止聯系目標計算機,ICMP回送請求失敗。
- Chapter 6, "Plug and Play for Function Drivers," concerns just one type of I/O request packet, namely IRP_MJ_PNP. 第六章，“即插即用驅動函數”只關注一種I/O請求包，叫做IRP_MJ_PNP。
- The identifier and sequence fields are used to match the echo replies to the corresponding echo request. 識別子和序號欄位使用來匹配回應回覆給對應的回應請求。
- Driver dispatch routines for most types of I/O request packet (IRP) execute at PASSIVE_LEVEL. 對于大部分種類的I/O請求包（IRP）驅動分派程序執行于PASSIVE_LEVEL。
- The identifier and sequence number fields are unique to the echo request and echo reply messages. 識別子和序號欄位對回應請求和回應訊息是獨有的。
- The ICMP echo request failed because the source address and destination address that are specified in an ICMP echo message are not in the same scope. 由于ICMP回送消息中指定的源地址和目標地址不在同一范圍內,ICMP回送請求失敗。
- Chapter 5, "The I/O Request Packet," introduces the subject of input/output programming, which of course is the real reason for this book. 第五章，“I/O請求包”介紹輸入輸出編程的主題，（這也是）（出版）本書的真實原因之一。
- If the destination device receives the ICMP echo request, it formulates an echo reply message to send back to the source of the echo request. 假如目的地設備接收到ICMP回應請求，它整理一個回覆訊息傳送回到回應請求的來源。
- PING stands for Passive Internet Groper and its job is to be able to essentially send an echo request to some device on the network. 03要排除網絡(luò )的故障我們要使用到幾個工具。我們要學習使用的第一個，也是總重要的一個工具就是PING命令。
- Some routines, such as the DriverEntry and AddDevice routines, as well as dispatch functions for a few types of I/O Request Packet (IRP), will be present in every such container. 一些程序，比如DriverEntry（驅動入口）和AddDevice（添加設備）程序，也為一些種類的I/O請求包（IRP）分配功能，也出現在這種容器中。
- The Ping class throws this exception to indicate that while sending an Internet Control Message Protocol (ICMP) Echo request, a method called by the Ping class threw an unhandled exception. Ping類引發此異常以指示當發送Internet控制消息協議(ICMP)回送請求時,Ping類調用的方法引發了無法處理的異常。
- The ICMP echo request failed because the destination IP address cannot receive ICMP echo requests or should never appear in the destination address field of any IP datagram. 由于目標IP地址無法收到ICMP回送請求或者永遠都不應當出現在任何IP數據報的目標地址字段中,ICMP回送請求失敗。
- UNIX uses User Datagram Protocol (UDP) with the option to use Internet Control Messaging Protocol (ICMP).Windows always defaults to ICMP echo requests (Ping). 這樣做的目的就是要了解，在那些外部訪問者的眼中，你的網絡(luò )系統的運行狀況和一些基本的面 貌、特征。
- Typically, NTP clients and Simple Network Time Protocol (SNTP) clients send client mode request packets to an NTP server. 通常,NTP客戶端和簡單網絡(luò )時間協議(SNTP)客戶端會(huì )將客戶端模式請求數據包發送給NTP服務器。
