您要查找的是不是：
- Remove intake manifold, yoke retainer and aligning yokes. 拆下進氣歧管、叉臂軛護圈，并對正叉臂軛。
- Direct gasoline injection and hydrogen intake manifold supply. 直噴式汽油和氫氣進氣歧管供應。
- When there is vacuum in the intake manifold, the vacuum holds the diaphragm up. 當進氣歧管有真空存在時，真空便向上吸引膜片。
- The main difference is how they move air to the intake manifold of the engine. 這三種形式主要的不同在于它們把空氣引入吸氣導管的方式。
- The pudding results from the failure of all the fuel to vaporize and from the sorting effect of the intake manifold. 積洼是全部燃料蒸發得不充分和進氣歧管類似影響的結果。
- If the engine backfires, the sudden pressure in the intake manifold forces the valve back. 如果發動機回火，進氣歧管驟增的壓力就迫使閥門向后移動。
- Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 安裝進氣歧管（見單元11-排氣系統和進氣歧管）。
- Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 拆下進氣歧管（見單元11-排氣系統和進氣歧管）。
- On a typical in-line six-cylinder engine the carburetor is located on the intake manifold between cylinder 3 and 4. 在標準的六缸直列式發動機上，化油器被設置在進氣歧管上3號和4號缸之間。
- This device, called the manifold heat-control valve, is built into the exhaust and intake manifold. 這種裝置稱為“歧管熱控制閥”，它拼裝在排氣與進氣歧管中。
- The piston moves up and down in the piston chamber primarily in response to changes in intake manifold vacuum. 活塞主要因進氣歧管真空度的變化而在活塞腔內上下移動。
- When the engine is shut off, the intake manifold cools and a slight vacuum forms as a result. 這是因為當發動機熄火時，進氣歧管冷卻而產生輕微的真空。
- Fault Description(reason): High voltage detected at intake manifold pressure sensor signal pin. 故障描述（原因）：檢測到進氣歧管壓力傳感器信號電壓值高。
- Intercooler installed in front of the radiator, intake manifold pipe joint moved to shorten path for intercooler hoses. Added oil flow to engine. 水箱前安裝冷熱氣自動調節器,水管及入口改裝,增加引擎噴油量。
- This paper introduces the calibration system and static and dynamic calibration method of an engine intake manifold pressure sensor. 介紹了發動機進氣歧管壓力傳感器的標定系統和傳感器靜、動態標定方法。
- We dedicated to provide NVH solutions to our customer for engine cam cover fastening, intake manifold fastening and other Powertrain related systems. 我們致力于為客戶提供發動機系統的NVH解決方案，包括發動機罩蓋減震緊固單元，進氣歧管減震緊固單元等等。
- The upper intake connectors are the long aluminum tube looking things that are between the throttle body and the intake manifold. 上面吸入連接器是長的鋁成管狀看事情在之間那些身體節流閥和吸入歧管。
- This thesis mainly carries on research of three dimensional surface reconstruction of variable intake manifold and air fluid simul. 可變式進氣歧管能提高進氣效率,是發動機低轉速時能提高缸內負壓的可變機構。
- In order to improve engine efficiency and torque as well as the engine performance,plastic intake manifold was developed for CA4GE engine. 為了提高發動機的效率和扭矩、改善發動機的性能,針對CA4GE發動機研究、設計、開發了發動機塑料進氣歧管。
- Now company has a production of CC intake manifold series, G series, F series, as well as a bumber of professional and flexible production line. 公司具備鑄造、沖壓、焊接、機加等工藝技術，擁有生產進氣歧管CC系列、G系列、F系列等多條專業及柔性生產線。
