您要查找的是不是：
- Take the Frequency Windage into Account When Using Digital Signal Level Meter to Measure Modulator 用數字場強儀測量調制器應注意頻率偏差
- Pulse width modulation (PWM) is an analog signal level for digital encoding. 脈沖寬度調制（PWM）是一種對模擬信號電平進行數字編碼的方法。
- Digital signal for crystal clear clarity. 透明的清晰的數字信號。
- Conversion of an analog signal to a digital signal, with steps between specified levels. 利用規定量化間隔，把模擬信號轉化成數字信號。參閱quantization。
- A Digital Signal Processor-based New ECG Automatic Analysis System. 基于數字信號處理技術的新型心電圖自動分析系統。
- Of course the sampling clock is itself a digital signal. 時鐘本身也是數字信號，也會(huì )干擾模擬電路。
- Multiplier is the key in the Digital Signal Processing System. 乘法器是數字信號處理系統中的關鍵。
- DSP is the abbreviation of digital signal processing. 數字信號處理(digital signal processing)又可稱為DSP。
- Fast transforms are important tools in digital signal processing. 快速變換是數字信號處理的重要工具。
- An Introduction to Digital Signal Processors，BRUNO PAILLARD ING. 數字訊號處理器簡介與應用，林傳生、李佩謙編著。
- Advanced on-chip digital signal processing performs tone control, Bass Boost and automatic level control for the microphone or line input through the ADC. 芯片在處理數字信號進行音調控制、低音增強和通過ADC或線的自動電平控制輸入話筒等較為先進。
- In digital signal technique, a signal that uses a positive(or negative) excursion and ground as the two binary signal states. 在數字信號技術中，用正(或負)向電壓與地兩個電平來表示二進制“1”和“0”的一種信號
- The whole Chinese operating interface lets you control the state Of the roads, knowing signal level. 全中化作操作界面,讓您充分掌握各種路況,訊號強弱分明。
- These vertical towers can relay digital signals. 這些立式塔可以中轉數字信號。
- On playback, the opposite process is applied (deemphasis), based on the signal level. 播放的時候，根據信號的等級應用相反的過程（減弱）。
- NRZ encoding relies on the signal level found in the timing window to determine the binary value for that bit period. NRZ編碼依據時序窗中訊號位準來決定位元周期內的二進位值。
- A method of sampling and encoding analog signal to create a digital signal. 一種將模擬信號取樣和編碼從而產生數字信號的方法。
- The MS is tried to hand over to cell D because it’s downlink signal level is higher that cell’s B. 移動基站嘗試移交至傳感器D，因為它的下行線信號水平比傳感器B要高。
- NRZ) is a digital-to-digital polar encoding method in which the signal level is always either positive or negative. 非零編程(NRZ)是一種數字編碼技術，在它的編碼中要么正電平要么負電平。
- Bit sequences are digital signals varying with time. 二進制序列是隨時間變化的數字信號。
