您要查找的是不是：
- Turn adjusting screw (1) clockwise to increase the delivery pressure, counterclockwise to lower it. 順時針?lè )较蛐D調節螺絲(1)以增加輸出壓力，反時針?lè )较蛐D降低輸出壓力。
- The high step moves from under the adjusting screw. 使高點從調節螺釘下移動。
- The adjusting screw rests on the high step of the cam. 調節螺釘落在凸輪高點上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新調節：松開調節螺絲上的鎖定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新調節：松開調節螺絲上的鎖定螺母。
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通過反時針?lè )较蛐D調節螺絲(1)從彈簧上拆卸壓縮件。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型調節螺絲。調節螺絲既有槽也有花紋邊。
- Remove adjuster lever, adjuster screw and spring. 拆卸調整器桿，調整器螺絲和彈簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直桿微調螺絲.
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更換閥座/桿模塊，先關閉供應管道，松開鎖緊螺母，退出調節螺絲。
- Loosen the adjustment screw, and adjust the length of the link rod. 請擰松調整螺絲，拔出或插入連接桿進行調整。
- To replace seat/stem module shut off supply, loosen locknut and back off adjusting screw. 要更換閥座/閥桿模塊，先關閉供應管道，松開鎖緊螺母，退出調節螺絲。
- To clean or replace parts; shut off supply, loosen lock-nut and back off adjusting screw. 如果要清洗或更換部件，關閉供應管道，松開鎖緊螺母，退出調節螺絲。
- Throngh improving ram adjusting screw structure,impel it staunch and stand economic benefits raises notable. 通過對滑枕調整絲杠結構的改進,使之堅固耐用,經濟效益得到明顯提高。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 擰緊調整螺絲到3 N·m (30 in-lbs)扭力。
- Lubricate adjuster screw threads and pivot with spray lube. 使用噴霧潤滑油潤滑調整器螺絲螺紋和樞軸。
- Two adjusting screws harmonise the guns with the sight. 有兩個調節鈕來校準武器和瞄準具。
- Firmly screw can on adapter, and turn the flow adjustment screw. 將料罐倒置與噴槍連接，旋轉打開流量閥，調節流量。
- To clean strainer or replace seat/stem module shut off supply, loosen Locknut and Lock Seal and back off Adjusting Screw. 要清洗過濾器或更換閥座/閥桿模塊，先關閉供應管道，松開鎖緊螺母和鎖緊密封，并且將調節螺絲退出。
- To replace seat disc; shut off supply, loosen nut (51) and back off adjusting screw (53) remove spring cage (3), spring (52) and washer (62). 要更換閥座閥瓣，先關閉供應管道，松開螺母(51)，擰下調節螺絲(53)，拆卸彈簧籠(3)、彈簧(52)和墊圈(62)。
