您要查找的是不是：
- Gets the current setting of the. 屬性的當前設置。
- Setting The current setting for the named option. setting指定選項的當前設置。
- Save the current set of signals. 保存當前信號設置。
- Command lists the current set of breakpoints. 命令列出當前的斷點集。
- Values for this setting range from 2 percent to 100 percent. 這個設置的值從2%25到100%25。
- Gets or sets the current setting for this switch. 獲取或設置此開關的當前設置。
- The original current set up by the radio waves is very feeble. 無線電波產生的初始電流很弱。
- Show the current setting of the radix for logging remote serial protocol. 顯示當前遠程機串口協議信息記錄的基數設置。
- Astrong current sets through the channel. 一股強流流過水道。
- The current sets in towards the shore. 潮水向岸邊涌來。
- To adjust the transition point of the clouds, simply change the 0.3 Value on the Condition node and the Set Range node. 要調整云上的過度點;簡單地改變條件節點的數值0.;3和設置范圍節點。
- Release current settings when doing renew. 在執行續訂時釋放當前設置。
- Applies the current settings to the loaded process. 將當前設置應用到加載的進程。
- Select Burn Tool, select brush diameter around 45, set Range to Midtones, set Exposure to around 8-10%. 選擇加深工具，畫筆直徑45左右，將范圍設置為中間調（圖片中為陰影，應該是作者寫錯了），將曝光設置為8-10%25。
- The current sets strongly eastwards. 急流迅猛東去.
- This gives the Set Range node the parameters it needs to transpose, or remap, the input values to new output values. 這使設置范圍節點得到它需要進行變換的參數，或重新貼圖，輸入值變成新的輸出值。
- If you do not specify a CSP name, Sn. Exe clears the current setting. 如果不指定CSP名稱;則Sn.;exe將清除當前設置。
- Calculates the setting range of each parameter in theory,and proves the method of wavelet transformation has higher frequency resolution than the method of FFT. 從理論上計算各個參數的設置范圍,并且證明小波變換方法比FFT方法有較高的頻率分辨率。
- You can modify the current setting on the Limits tab of a specific mailbox. 可以在特定郵箱的“限制”選項卡上修改當前設置。
- When an option is not explicitly specified, the current setting is applied. 未顯式指定選項時,則應用當前設置。
