您要查找的是不是：
- The factors affecting the viscosity of quench oil were analyzed. 分析了急冷油粘度增長的影響因素；
- Without obviously declining gradient, the hardness distribution in the hardened layer produced by laser quenching is rather different from that by conventional quenching. 激光淬火硬化層的硬度分布，無明顯的硬度梯度，這與常規淬火方法的結果不太一樣。
- Compared with conventional quenching and tempering process,the effect of austempering on the microstructure and properties of high chromium white cast iron was studied. 對球鐵凸輪軸的等溫淬火工藝進行了分析,認為產生淬火裂紋的主要原因是:加熱爐內的溫度過高及等溫槽內鹽浴老化、等溫淬火溫度偏低。
- The fitting is vertical to allow for free draining with straight run after quench oil injection for good mixing. 急冷器是立式的，以便急冷油注入后經直管自排，以達到良好的混合。
- Application Indirect closed heat-transfer systems. It is also suitable as a general purpose quenching oil. 密封式的間接熱傳遞系統。亦適合一般制鋼時作淬火用。
- The study on formulation and performance evaluation of overspeed quenching oil were described. 闡述了超速淬火油的研究過程及其性能評定結果。
- The hardness distribution without obviously declining gradient in one range of the hardened layer produced by plasma quenching is rather different from that by conventional quenching. 等離子表面淬火硬化層的硬度分布,在某一區域內無明顯的硬度梯度,這與常規淬火方法的結果不太一樣。
- Frequent leakage of mechanical seal of quenching oil circulating pump was a hard problem in ethylene production. 急冷油循環泵的機械密封頻繁泄漏是困擾乙烯生產的老難題。
- And the research progress of mechanisms of quench oil viscosity changing and mechanisms of anfifoulant were summaned. 總結了當前在急冷油粘度變化和減粘劑減粘原理方面的研究進展;
- Degenerated and aginged quenching oil was reformed,its service property can be resumed and service life can be prolonged. 對已發生變質和老化的淬火油進行再生,可以恢復其使用性能,延長其使用壽命。
- On the other hand, as the temperature of quenching oil rises, the cooling properties change resulting from the lowing of the oil Viscosity . 另一方面，淬火油使用溫度提高，油品運動粘度降低，流動性提高，淬火油冷卻能力提高。
- The dilution steam generator is the key e-quipment which recovers the heat of quench oil, generates DS and keeps the thermal balance of system in ethylene plant. 乙烯裝置稀釋蒸汽發生器是回收循環急冷油熱量和發生稀釋蒸汽(DS),保證該系統熱平衡的主要設備。
- Traditional and current methods for reducing quench oil viscosity were also introduced,laying stress on technologies of viscosity reducing tower and adding antifoulants. 介紹了傳統的和現行的急冷油減粘方法,重點介紹了減粘塔技術和添加減粘劑技術;
- Traditional and current methods for reducing quench oil viscosity were also introduced, laying stress on technologies of viscosity reducing tower and adding antifoulants. 介紹了傳統的和現行的急冷油減粘方法，重點介紹了減粘塔技術和添加減粘劑技術；
- Through analysis and lest on liquid leakage cause of decanting distributor of quench oil tower, the source of gasoline tank heavily entraining water was found. 通過對急冷水塔的沉降分布器漏液原因進行分析及實驗,找到了汽油槽嚴重帶水的水來源。
- The reason of high viscosity of the quench oil in the ethylene plant is disclosed. The method is presented to reduce viscosity by adding an inhibitor in" quench oil. 對乙烯裂解裝置中急冷油粘度增長的原因及反應機理進行了分析探討,并提出了急冷油減粘劑的開發方向。
- In this paper,the classify standards,technique indexes and components etc.of quenching oils were introduced systemally. 系統地介紹了熱處理用淬火油的分類標準、技術指標及組分等相關知識。
- The operation of quench systems in domestic ethylene plants are not very good until now, especially the operating parameters of quench oil system deviate from the design parameters. 目前國內乙烯裝置急冷系統操作大部分不理想,尤其是急冷油系統的操作參數與設計值偏離很大。
- "How are you?" is a conventional greeting. “你好”是一個習慣問候語。
- The management of technique index of quenching oils,service life of quenching oils,and matters needing attention in use were analyzed. 分析了淬火油技術指標的維護,淬火油的使用壽命,淬火油的選擇以及使用中的注意事項。
