您要查找的是不是：
- NCL: No control limit is allowed. 不允許超出控制界限。
- NCL:No control limit is allowed. 不允許超出控制界限.
- NCL：No control limit is allowed. 不允許超出控制界限。
- The aluminum double-joint spring strut front axle delivers weight savings of up to 30% compared to conventional steel construction. 同傳統的鋼結構相比，鋁制雙控制臂麥弗遜式懸掛結構前橋的重量減少了30%25
- Variation beyond a control limit is evidence that assignable causes are affecting the process. 管制界線是從制程的資料來計算，不要和規格界線混淆。
- Frequency control limits the number of stations you can tune into. 頻率控制限制了你們能調諧進的臺站數量。
- A control chart usually displays a lower control limit (LCL) and an upper control limit (UCL). 注 : 一般而言 , UCL與 LCL 的位置為平均值的正負三個標準差。
- This includes computing and interpreting capability indices, estimating the% failures, control limit calculations, etc. 包括計算和解釋過程能力指數、計故障百分率、制限計算等。
- This includes computing and interpreting capability indices, estimating the % failures, control limit calculations, etc. 包括計算和解釋過程能力指數、估計故障百分率、控制限計算等。
- There is no industry control limits for Copper and Lead in SnAgCu solder pot. 目前行業中沒有用于SnAgCu焊料槽中銅和鉛的控制極限。
- The new C70's chassis features spring struts at the front and a Multilink axle at the rear for predictable handling. 新C70的底盤彈簧支柱功能的前端和多重車軸后面的可預見的處理。
- The statistical theories of hypothesis tests and the quality control limit of multivariate have been used to study the discriminance for drink quality stability. 同時,運用假設檢驗、多元質量控制界等統計理論研究了質量穩定性的判別方法。
- HACCP control tablet covered critical control points (CCP), evident hazard, critical control limit, monitoring measures, and error correction measures etc. HACCP控制表內容為關鍵控制點(CCP)、顯著危害、關鍵控制限度、監控措施、糾偏措施等項目；
- The recommended control limits for lead is max 1000 ppm, which is in accordance with the RoHs regulation. 鉛的推薦控制極限最大為1000 ppm,該值符合RoHs規范。
- Upper and lower statistical control limits that define the constraints of common cause variations. 統計意義上的上限值和下限值,定義數據變量的容許范圍。
- For lead-free wave soldering, what is the recommended control limits for impurities such as lead, copper and silver for good control? 要進行無鉛波峰焊接,推薦的鉛、銅和銀等添加劑的控制限制如何才能獲得最佳的控制效果?
- Is there a documented system for controlling limited life materials? 對于有使用壽命的原料是否有一個文件化的控制體系
- Most work with insulation board is indoors and is likely to produce dust concentrations in the atmosphere exceeding the Control Limits. 大部分絕緣板的拆除作業均在室內進行，且產生的環境粉塵濃度很可能超出“控制限度”。
- "Is the microetch rate monitored? Is it under SPC control with calculated control limits and are the charts & actions current? 是否對微蝕率進行監控？其是否有SPC圖管控并有正在進行的措施？"
- The leaf spring mounted transversally does require additional Bracing; control arms and strut rods are therefore used. 在后懸架系統中,鋼板彈簧橫向懸掛,需有額外的支撐,因此要使用控制臂和橫擺臂。
