您要查找的是不是：
- hand brake pull rod guide anchor 手制動拉桿吊
- hand brake pull rod chain 手制動拉桿鏈
- hand brake pull rod guide 手制動拉桿導架
- hand brake pull rod jaw 手制動拉桿頭
- hand brake pull rod 手制動拉桿
- brake pull rod 制動桿
- Loosen the adjustment screw, and adjust the length of the link rod. 請擰松調整螺絲，拔出或插入連接桿進行調整。
- The high step moves from under the adjusting screw. 使高點從調節螺釘下移動。
- The adjusting screw rests on the high step of the cam. 調節螺釘落在凸輪高點上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新調節：松開調節螺絲上的鎖定螺母。
- The pull rod is screwed into the inside thread of the anchor head. 將拉桿旋入錨頭內的絲扣。
- To Readjust - Loosen lock nut on the adjusting screw. 重新調節：松開調節螺絲上的鎖定螺母。
- Mechanical mandrel, axially actuated via machine pull rod. 機械夾緊心軸;通過機床拉桿軸向操縱.
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通過反時針?lè )较蛐D調節螺絲(1)從彈簧上拆卸壓縮件。
- Aileron servo pull rod should be vertical to the shaft of aileron basically. 副翼舵機拉桿應基本上垂直于副翼轉動軸線。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型調節螺絲。調節螺絲既有槽也有花紋邊。
- Below the fuselage----Make and Install Elevator pull rod and collet. 機身下面-升降舵拉桿及夾頭的制作與安裝。
- hand brake drive rod adjusting fork 手制動器驅動桿調整叉
- Remove adjuster lever, adjuster screw and spring. 拆卸調整器桿，調整器螺絲和彈簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直桿微調螺絲.
