您要查找的是不是：
- Metope, end face, window make gout change. 墻面、頂面、窗戶等做趣味變化。
- Basically use at material of condole end face. 主要用于吊頂面材。
- Lubricationhole is in the end face at theribbed end of the tsud only. 油孔公在螺栓擋邊端端面上。
- It is spread on end face of extruded shim to make shim separate with discard. 涂于擠壓墊片端面，使墊片與壓余分離。
- The smoothness of that shaft 's end face reaches the required criteria. 某軸體的端面其平坦度符合應達到的標準.
- With the face grinding attachment, perpendicularity of the end face to the bore after grinding can guaranteed. 帶有端磨裝置，保證工件端面與孔的垂直度。
- The penstock chooses end face integral seal and the seal material is special rubber, which makes the seal safety and durable. 閘門采用端面整體密封，密封材料采用特殊橡膠材料，保證密封牢靠、耐用。
- This hexahedral included end face, all around establish face and underside 6 place. 這個六面體包括了頂面、四面的立面和底面六個部位。
- This special fixture can be used to machine inner bore,excircle,and end face,and also can be repeatedly used. 該夾具可完成內孔、外圓、端面的加工,還可重復使用。
- It is spread on end face of extruded shim to make shim separate with discard. 3. 2、涂于擠壓墊片端面，使墊片與壓余分離。
- This hexahedral included end face, all around establish 6 position such as face and underside. 這個六面體包括了頂面、四面的立面和底面等六個部位。
- After technology improvement, the used material reduces, and the crack, shrinkage cavity of end face and puckering don't exist in the furcation part. 工藝改進后，材料減少，原來存在的裂紋、縮口以及接頭處參差不齊的問題得到徹底地解決。
- Tonal and main be to pass the ground, metope, end face to reflect, and adornment, furniture rise only adjust, additional action. 色調主要是通過地面、墻面、頂面來體現的，而裝飾品、家具等只起調劑、補充的作用。
- The reverse-drawing process in the combination stamping forming for a squirrelcage unclosed end face covering and a closed one was analyzed. 分析了鼠籠端面透蓋和悶蓋沖壓組合成形反拉深工藝,介紹了反拉深模具設計要點,計算了反拉深模的沖壓力,設計了拉深模和反拉深模。
- The worker fixed a bracket on the wall. 工人在墻上固定了一個支架。
- The house that two couplet are discharged and builds covers an area of about 3 mus, wall body is virescent, end face is dazzling red tile. 兩棟聯排而建的房屋占地約3畝，墻身淡綠色，頂面是耀眼的紅瓦。
- The temperature of the crystal is the lowest, and the shape changed of the end face is the smallest by using the end surface hydrocooling method. 三種冷卻方式中，泵浦端水冷情況下晶體溫度最低，端面形變量最小。
- Their incomes are brought into a higher bracket. 他們的收入已進入一個較高的等級段。
- It is lightly spread on end face of flat die cavity (without fluid guide hole) to make extruded solid profile separate automatically. 輕涂于平模(沒有導流孔)模具型腔端面，使擠壓的實心型材自動分離。
- This book is written for the 10-to-11 age bracket. 這本書是為十到十一歲年齡層的孩子寫的。
