您要查找的是不是：
- The results expatiate that boron carbide ceramics can be sintered in low temperature by approaches mentioned above. 結果表明,通過以上幾種途徑可以實現低溫燒結。
- Boron carbide nanotubes(nano-fibers) was prepared by boron powder and carbon nanotubes(CNTs) at high temperature in a quartz tube after being vacuumed. 以碳納米管為原料,利用真空封管技術在高溫下用硼粉對碳納米管進行摻雜處理,獲得了碳化硼納米管(纖維)。
- Boron carbide can be obtained by means of thermal decomposition of triethylborane, tripropylborane and tributylborane, respectively. 以合成的三乙基硼、三丙基硼和三丁基硼為原料通過熱裂解制備純度較高的碳化硼超硬材料；
- This paper introduces several measurement methods of boron carbide micropowders, analysis condition of use and performance of each instrument. 介紹了在碳化硼微粉檢測中幾種常用的粒度測量?jì)x器,對各自的使用情況和性能特點進行了分析。
- With active carbon and silicon carbide as sintering aids,the boron carbide ceramic materials were prepared by using vacuum hot pressing sintering. 以活性炭和碳化硅為燒結助劑,采用真空熱壓工藝,制備了碳化硼陶瓷材料。
- The topographical characteristics of the boron carbide sample surfaces were investigated with atomic force microscope/friction force microscope (AFM/FFM). 用原子力/摩擦力顯微鏡對碳化硼樣品進行了表面形貌的微觀分析。
- Abstract: The topographical characteristics of the boron carbide sample surfaces were investigated with atomic force microscope/friction force microscope (AFM/FFM). 摘 要: 用原子力/摩擦力顯微鏡對碳化硼樣品進行了表面形貌的微觀分析。
- Different measurement methods of boron carbide micropowders of FEPA standard were analysed,the linear relation among the laser、sedimentation and resistance analyzer was obtained. 通過對F標準碳化硼微粉不同檢測方法的對比分析,得出激光粒度分析儀與沉降管、電阻顆粒計數器檢測結果之間的線性關系,其結果對生產具有指導意義。
- Boron carbide nanotubes (nano-fibers) was prepared by boron powder and carbon nanotubes (CNTs) at high temperature in a quartz tube after being vacuumed. 摘要以碳納米管為原料，利用真空封管技術在高溫下用硼粉對碳納米管進行摻雜處理，獲得了破化硼納米管（纖維）。
- LI Ping, WANG Shui-lan, GAO Ji-qiang, et al.Therma desposition of boron carbide powder in vaccum [J].Weapon Materials Science and Engineering, 1998,21(3): 36-40. [3]李平;王水蘭;高積強;等.;碳化硼粉末的真空熱處理凈化研究[J]
- The Boron Carbide Abradant Plant of Mudanjiang City 牡丹江市碳化硼磨料廠
- The development and research status of boron carbides for the Bulletproof Ceramic were summarized in this article. 本文綜述了碳化硼抗彈陶瓷材料的發展和研究現狀。
- Preparation of boron carbide powders with high tap density 高振實密度碳化硼粉的制備
- You need to filter the drinking water. 你需要把飲用水過濾。
- The Grain SiZe and Lattice Constant of Boron Carbide 碳化硼的粒度與點陣常數
- Effect of Raw Powders on Sintering Properties of Boron Carbide 原料粉末對碳化硼燒結性能的影響
- A filter traps dust from the air. 過濾網可存住空氣中的塵埃。
- Standard Specification for Nuclear-Grade Boron Carbide Powder 核純級碳化硼粉末
- The news of the defeat started to filter through. 戰敗的消息開始傳出來。
- It won't take long to filter the coffee. 用不了多少時間就可以把咖啡過濾好。
