您要查找的是不是：
- We call this surface the stress quadric. 我們稱這個曲面為應力二次曲面。
- Conic sections and quadric surfaces. 二次曲線與二次曲面。
- bitangent quadrics 雙切二次曲面
- How to prove the problems of inequality by quadric form is discussed. 討論了利用二次型證明不等式的問題.
- A simple method of solving an orthogonal transformation with a primary transformation is presented by change quadric form into canonical form. 給出了利用初等變換求一個正交變換化實二次型為標準形的簡便方法。
- It has appeared many results about regularity for weak solutions of quadric jncreasing parabolic equations. 得到了一類二階散度型橢圓方程很弱解的一個正則性結果。
- The key idea of SSVM is to transform the standard model of SVM into an unconstraint quadric convex programming problem. SSVM模型的基本思想是將標準的支撐向量機模型轉化成一個無約束二次凸規劃模型進行求解。
- Extracting quadric surface from measured data is an important problem in reverse engineering of mechanical parts. 摘要在機械產品的逆向工程中，針對測量數據提取常用二次曲面是非常重要的。
- This paper proposes for the first time to use genetic algorithm based on real-number-coding to extract quadric surface. 首次提出利用基于實數編碼的遺傳算法針對離散數據點進行二次曲面提取。
- On the area of actual process, It is often seen that one surface of the part is quadric surface. 在實際生產中,如果某一加工表面是二次曲面,對于這類曲面輪廓的加工常采用數控加工方法。
- At last, the commonly methods and steps for represention quadric surfaces using NURBS was find. 最后總結出了二次曲面進行NURBS表示的一般方法和步驟。
- Technology parameters were optimized by quadric regression orthogonal rotary design experiments. 結果表明,多糖得率的主要影響因素及其順序為浸提溫度、浸提時間、液固比;
- In this paper, the authors expounded covariance analysis with two correlated variables and solved it with quadric form. 利用二次型解決了雙協變量的方差分析方法。
- An algorithm of feature surface recognition based on quadric surface fitting and geometry property was presented. 摘要提出了基于二次曲面擬合誤差分析和幾何屬性分析的特征曲面識別算法。
- In order to solve the problem,this paper put forward an improved mesh simplification algorithm based on quadric error metrics. 為了解決這個問題,本文作者提出一種改進的基于二次誤差測度的網格簡化算法。
- Then, on this basement, the method of calcutating the control vertecs and weights was given while representing quadric surfaces using NURBS. 在此基礎上給出了二次曲面進行NURBS表示時控制頂點和權因子的計算方法。
- The construction of nonlinear normal modes of a system with 1: 2 internal resonance is presented for the case of quadric nonlinearity. 利用多尺度方法研究了一類1:2內共振平方非線性系統的非線性模態的近似解及其分叉特性。
- A new algorithm is presented in this paper for piecewise quadric B-splines curve reconstruction from scattered data in a plane. 摘要基于控制頂點擾動的思想提出了一種新的曲線重構算法，用于構造一條分段二次B樣條曲線來逼近平面上的散亂數據點。
- The system can be easily employed in automatic remanufacturing of workpiece of quadric surface, with various state of surface damage. 系統適用于缺損表面為二次曲面的工件，對不同缺損程度的工件的再制造可以自動進行。
- On the basis of our research work, we present a new algorithm for uniformly simplifying triangle mesh models, which is based on quadric error measure. 然后，在總結“折疊型”簡化算法的簡化過程的基礎上，提出一個基于二次誤差度量的三角網格攤薄簡化算法。
