您要查找的是不是：
- This paper introduces the characteristic and effect of plastic refractory gunning to billet reheating furnace and soaking pit at Baosteel. 簡要介紹了可塑料噴涂工藝的優點以及在寶鋼高線加熱爐、均熱爐上的實際應用效果。
- Zero-dimensional Model of Billet Reheating Furnace for Engineering Application 面向工程應用的鋼坯加熱爐零維數學模型
- In order to resolve the billet-jamming problem during plate production,the real-time tracing system for billet of pushing reheating furnace has been established. 針對中厚板生產中出現的鋼坯混鋼問題,建立了推鋼式加熱爐鋼坯實時跟蹤系統。
- Also,revamps have been made to the No.1 reheating furnace in ref... 同時參照2%23加熱爐對1%23爐進行了改造,使用效果良好。
- THE APPLICATION OF MINIMUM PRINCIPLE TO THE DELAYSTRATEGY OF REHEATING FURNACE? 最小值原理在加熱爐待軋策略研究中的應用?
- billet temperature in reheating furnace 爐內鋼溫
- The reheating furnace for rolling employs water for cooling furnace door, skied pipes and so on. 加熱軋件的加熱爐用水來冷卻爐門和滑道管等。
- Through investigate and analyse billet reheating technics,find the factor which influence the billet oxidizing burning loss,and through adopted some technic measure,Reduced the oxidzing buring loss of the billet availably. 通過調查分析板坯加熱工藝,找到影響板坯燒損的因素,并采取相應的技術措施,使板坯氧化燒損得到了有效控制。
- The reheating furnace for rolling employ water for cooling furnace door,akid pipe and so on. 加熱軋件的加熱爐用還來冷卻爐門和滑道管等。
- The reheating furnace for rolling employs water for cooling furnace door,skied pipes and so on. 加熱軋件的加熱爐用水來冷卻爐門和滑道管等。
- Design and devlopment of walking-beam reheating furnace of Beam Section Steel Plant in Anshan Iron and Steel Co. 鞍鋼大型廠步進式加熱爐設備設計與開發。
- This paper analyses elemental composition of sliding guide on pusher-type reheating furnace, introduces the research and application of a new sliding guide material. 摘要分析了推鋼式加熱爐滑塊材料的元素構成，并介紹了一種新材質滑塊的研究與應用情況。
- Prediction model and online compensation of slab surface temperature for stepping reheating furnace were studied. 摘要主要研究步進式加熱爐鋼坯表面溫度預報模型和在線補償方法。
- Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line. 由于再加熱爐出料方式設計上的原因,限制了PQF軋機生產線的軋制節奏,從而影響產量。
- It also provides technical support for the optimizing design of reheating furnace and is worth of widely application. 對步進梁式加熱爐完善設計提供重要技術依據，具有推廣應用價值。
- Based on total heat exchange factor method,the online control process for reheating furnace was studied by simulation. 以總括熱吸收率法為基礎,對連續加熱爐在線控制過程進行了軟件仿真研究。
- A new method to estimate optimum heating operation for reheating furnace is presented in this paper. 提出了計算加熱爐最佳加熱制度的一種新方法。
- The neural network adaptive control method is applied in combustion control system of reheating furnace. 介紹了將神經網絡(luò )自適應控制思想應用于步進梁加熱爐燃燒過程控制。
- The reheating furnace for rolling employ water for cooling furnace door, akid pipe and so on. 加熱軋件的加熱爐用還來冷卻爐門和滑道管等。
- The two level computer control system is adopted on the reheating furnace in H Beam Mill of Magang Ltd. 馬鋼H型鋼廠加熱爐燃燒控制系統采用二級計算機控制系統。
