您要查找的是不是：
- Static axial load factor of the bearing 軸承的軸向靜載荷系數
- Basic static load rating of single bearing, or bearing pair (see product tables), kN 單列軸承或配對軸承的基本額定靜載荷(見產品表),kN
- If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated. 如實際負荷為徑向和軸向復合負荷,則必須計算當量軸承靜負荷。
- The basic dynamic and static load ratings for the Solid Oil bearings are the same as for the corresponding standard bearings. Solid Oil軸承的基本額定動負荷和靜負荷與對應的標準軸承相同。
- With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension. 軸承徑向和軸向的承載能力都比較大，各配件可替換性強。軸承通過調節偏心外六角來調整芯軸位置進而達到調整側滾輪軸向尺寸的目的。
- For applications where the axial load is heavier than the radial load (fig 7). 用于軸向負荷大于徑向負荷的應用場合(圖7)。
- basic static capacity ( BSC ) rating 額定靜負荷
- This type of bearings is separable , which can only carry axial load . 單向推力球軸承是可分離型軸承，只能承受軸向載荷。
- OBJECTIVE: To investigate the impact of axial load on lumbar dural sac. 目的：實驗擬探討軸向負荷對腰椎硬膜囊的影響。
- basic static capacity BSC rating 額定靜負荷
- Thrust ball bearing is separable bearing and only can be subject to axial load. 推力球軸承為可分離型軸承，只能承受軸向載荷。
- basic static capacity (BSC) rating 額定靜負荷
- The basic load ratings provided in the product table take this into account. 根據產品表中列出的基本額定,這一點已被考慮到。
- Shall we get down to the loading rate now if you do not mind? 如果您不介意的話，我們現在來談?wù)勓b船率如何?
- However, the radial load must not exceed 50 % of the simultaneously acting axial load. 但是,徑向負荷不能超過同時作用的軸向負荷的50%25。
- Static load rating of ball bearing 軸承基本額定靜負載
- Spherical plain thrust bearings can carry a radial load Fr in addition to the axial load Fa. 球面滑動止推軸承,除軸向負荷Fa外,還能承受一定的徑向負荷Fr。
- pre-applied hyper static axial force 預加力次軸力
- Cylindrical roller backing bearings without flanges or flange rings cannot accommodate any axial load. 無擋邊或擋圈的圓柱滾子支承軸承不能承受任何軸向負荷。
- The basic load ratings given in the product table under the heading "Roller" take this influence into account. 在產品表中“滾子”標題下列出的基本額定負荷考慮到這種影響。
