您要查找的是不是：
- Tables of computed altitude and azimuth H.O. 高度方位表。
- We have a plan and are “on azimuth. 我們有一個計劃并在“對準方位?！?/li>
- Magnetic azimuth bearings are approximate. 磁性方位角軸承是近似。
- The Azimuth value must be between 0.0 and 360.0. 地平經度值必須介于0.;0和360
- This azimuth motion is known as the ballistic deflection error. 這種繞方位軸的運動稱為沖擊偏差。
- This method requires a near-field source whose azimuth is known. 該方法要求一個方位已知的近場校正源。
- A steering-invariant constant beamwidth beamforming algorithm is proposed. 該文提出了方向不變恒定束寬波束形成算法。
- Such trilateration is liable to rapid accumulation of azimuth error. 這樣的三邊測量鎖的方位誤差容易迅速積累。
- The length and azimuth of one side at each junction point is first decided on. 每個交叉點上的一條邊的長度和方位角是一開始就決定的。
- Currently there are two typical spot-beam models with equal beamwidth and equal spotarea. 目前等波束寬度模型和等點波束面積模型是兩種常用的點波束模型。
- The dial index will rotate in azimuth, giving an incorrect heading reading. 讀數示標會(huì )繞方位軸轉動，給出不正確的航向讀數。
- Azimuth and elevation are important properties for aural presentation. 方位和高度是音頻的重要屬性。
- The azimuth preprocess circuit implementation and its result are presented. 文中給出了電路應用和實現結果。
- The altazimuth goes up-down (moving in altitude) and side to side (azimuth). 地平式的則是上下、左右運動。
- A nesting line array can maintain the constant beamwidth over a very wide frequency range (N octaves, N = 7). 摘要線性嵌套陣可以很好地在很寬的頻率（N個倍頻程，N=7）上實現恒定束寬。
- An analysis of results in various miss distance and miss azimuth was made. 分析了不同脫靶角和不同脫靶量彈目交會(huì )信號;
- The effect of antenna parameters on the beamwidth and side lobe level is analyzed. 分析了天線參數對主瓣寬度和副瓣電平的影響；
- In Bistatic spotlight SAR design, azimuth resolution is a key factor. 摘要在雙站聚束式合成孔徑雷達系統設計中，分辨率是一個關鍵的參考因素。
- With the aid of a computer, curves of beamwidth and side lobe versus the antenna parameters are plotted. 并借助計算機繪出了主瓣寬度和副瓣電平與天線主要參數的關系曲線；
- Inclinometer is an Instrument testing drift angle and azimuth of drift hole. 測斜儀是一種測定鉆孔傾角和方位角的儀器。
