您要查找的是不是：
- Combustion engine driven arc welding set 內燃機驅動式弧焊機
- Motor driven arc welding set 電動機驅動式弧焊機
- arc welding set 電弧焊機組
- single operator arc welding set 單人電焊機
- The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 提出了CO2氣體保護焊短路過渡的和諧控制思想，并建立了相應的控制系統。
- Abstract: The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 文摘:提出了CO2氣體保護焊短路過渡的和諧控制思想，并建立了相應的控制系統。
- For Automatic Welding-Electric Arc welding goggles and ccd imaging system. 用于自動變光電焊焊接護目鏡以及看焊縫的ccd成像系統。
- Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蝕,強度高。鋁合金氬弧焊用。
- Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用。
- A CAD system of AC arc welding transformers called AWVTCAD was studied. 本文對交流弧焊變壓器的計算機輔助設計系統進行了研究，簡稱“AWVTCAD”，結果表明利用該系統對弧焊變壓器設計，不僅能提高計算精度與速度，而且也減輕了設計者的勞動強度及降低設計成本。
- It is perfectphase trigger circuit for arc welding power source of scr. 該相控觸發電路是晶閘管整流弧焊電源的理想觸發電路。
- Perhaps I need to pull apart another SCR and try the arc welding approach. 也許我需要把除了另一可控硅和審判電弧焊接的辦法。
- Use manual metalic arc welding, the type of electrod is A102 for material 304. 設備采用手工電弧焊，304材質焊條牌號為A102。
- Arc brazing has the characteristics of braze welding and arc welding. 電弧釬焊是近十年來才發展起來的一種新型硬釬焊工藝，兼有釬焊和電弧焊的特點。
- Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc. 如：電弧焊、二氧化碳氣體保護焊、氬弧焊等各種焊接。
- The problems of the peculiarities of arc welding and the estimation of weld quality are discussed. 主要考慮了弧焊特性的提取以及焊接質量的估計。
- The etched section also reveals that multiple weld passes were made over the top of the original submerged arc weld pass. 從酸蝕斷面還可以看出：在原自動埋弧焊的上面覆蓋有多層焊道。
- Re-melding in Ar arc welding of camshaft is particular heat treatment for hardening. 凸輪軸氬弧重新熔化硬化是一獨特的熱處理方式。
- Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用。
- Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蝕。純鋁氣焊、氬弧焊用。
