您要查找的是不是：
- On-line Modeling of Air Temperature System in a Naturally Ventilated Greenhouse 自然通風溫室溫度系統在線建模的研究
- Why the Air Temperature Is Going High? 氣溫怎能不越來越高?
- The day of the air temperature is worse. 氣溫日較差。
- What causes the air temperature to fall at night? 為什么晚間氣溫會(huì )下降?
- Air Temperature Sensor Not Detected. 警告!未檢測到空氣溫度傳感器。
- The air temperature was now well above freezing. 氣溫高出冰點好多度。
- If proper coolant flow through the cooling system is verified, and heater outlet air temperature is still low, a mechanical problem may exist. 如果確定通過冷卻系統的冷卻劑流量正確，并且加熱器出口溫度仍然很低，可能存在某個機械故障。
- The two chief function of any air-conditioning system are the regulation of air temperature and humidity. 任何空氣調節系統的兩大主要功能，就是調節空氣的溫度和濕度。
- This paper introduces a DDC(Direct Digital Control) temperature system. 介紹一種 DDC(直接數字控制 )溫度系統。
- PID temperature control system, display the regenerate air temperature and return air temperature. 采用PID溫度控制系統，可顯示再生溫度和低露點回風溫度；
- The air temperature over a large area remain at or below 0℃. 大面積上空的氣溫保持在0℃或0℃以下。
- What causes the air temperature to rise in the daytime? 為什么日間氣溫會(huì )上升?
- The average air temperature should be about 24 degrees Celsius. 空氣的平均溫度應該在24攝氏度左右。
- The predictive control and the PID controller were combined for controlling of the reheated steam temperature system. 摘要將預測控制和PID控制器結合運用于再熱汽溫系統的控制中。
- In some countries air temperature is given in degrees of Fahrenheit. 在某些國家氣溫以華氏溫標給出。
- The graduation design, the topic is“Electric oven temperature system modeling and IMC control”. 本次畢業設計的題目是“電烤箱溫度系統的建模與IMC控制”。
- By the combined use of a prediction control and PID controller in the control of a reheat steam temperature system. 將其應用于火電機組過熱汽溫控制進行仿真研究 ,結果表明所提出的預測控制算法具有優良的控制性能和很好的魯棒性。
- Intake air temperature sensor input above the minimum acceptable voltage. 進氣空氣溫度感知器輸入高于最小可接受電壓。
- It focuses on the key application technique of the high and low temperature system of VLSI, and some application know-how as well. 重點討論了集成電路高低溫測試系統，實際應用的關鍵技術及幾個應該注意的技術細節。
- They form when the air temperature is about fifteen degrees below zero Celsius. 它們是空氣溫度大約在攝氏零下15度左右時形成的。
