您要查找的是不是：
- AICV Air Injection Check Valve 空氣噴射單向閥
- Check valve guiding shall be plastic to plastic. 止回閥引導裝置應該是塑料對塑料。
- Remove check valve and valve seal from booster. 從倍力器上卸去逆止閥和閥門密封。
- Connect vacuum hose to booster check valve. 連接真空軟管到增壓器檢測閥。
- To test for tightness of second check Valve. 檢測第二止回閥的密封性。
- ANSI FLANGED SWING CHECK VALVE CLAS. 美標法蘭止回閥。
- Reassemble the Check valve modules. 重新組裝止回閥模塊。
- Now air injection into light oil for EOR has received more attention. 目前注空氣提高輕質原油采收率受到廣泛的關注。
- Connect vacuum hose to booster check valve . 連接真空軟管到增壓器檢測閥。
- Purpose: To test check valve No. 1 for tightness. 目的:檢測止回閥1號的密封性。
- Sticky outlet check valve poppet. 1檢查過濾的進水管線。
- CAUTION: The check valve spring is in compression. 警告：止回閥彈簧處于壓縮狀態。
- The wax appearance temperature rose after air injection and fell when the temperature of air injection rose. 注空氣后比注空氣前石蠟沉積點高；注空氣溫度增加，石蠟沉積點降低；
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回閥閥蓋的四個螺絲。
- Moreover, the principle and evaluation method of LTO process are discussed, and the developing trend of air injection is forecasted. 此外，還論述了注空氣低溫氧化技術的原理、評價方法等方面的內容，預測了該技術的發展趨勢。
- Air injected into the powder path to atomise it into a pattern. 按照粉末路徑到噴涂成型（工件）之間噴射的空氣。
- A check valve may be required ahead of the backflow preventer. 此時在防回流閥前面可能需要安裝一個止回閥。
- As advancing of technical progress, air injection LTO process will be an inevitable trend of gas flooding both in China and the world. 隨著技術進步，注空氣低溫氧化技術是我國乃至全世界注氣提高采收率技術發展的必然趨勢。
- Experimental studies of turbulent combustion were conducted in a test facility for swirl combustor with staged air injection. 本文在分級進風旋流燃燒室的實驗裝置上進行了湍流燃燒的實驗研究。
- Service the second check valve using steps 2 through 12. 按照第2步至第12步維修第二止回閥。
