您要查找的是不是：
- The disk controller was chomping all day yesterday. 磁盤驅動器昨天壞了一整天。
- disk controller board 磁盤控制板
- Work with the change control board. 變更控制委員會(huì )是審批變更的權力機構。
- Cut the GREEN jumper wire on the Control board. 剪掉（切斷，停止）控制板上綠色跳線。
- The floppy disk controller returned inconsistent results in its registers. 軟盤控制器返回與其寄存器中不一致的結果。
- The sluices are worked from the control board. 閘門是由控制臺操縱的。
- The sluices are worked from the control board . 閘門是由控制臺操縱的。
- Reinitializes the disk controller and determines the hard disk parameters. 重新初始化磁盤控制器,并確定硬盤參數。
- Upgrade disk controller BIOS and firmware to the latest vendor revisions. 將磁盤控制器BIOS和固件升級到最新供應商版本。
- These control bytes are handled entirely by the disk controller circuits. 這些控制字節被磁盤控制電路完全管理。
- No power to control board or diagnostic light burned out. 控制板上沒有電源,或診斷燈燒壞。
- Carefully unsolder the battery from the control board. 小心地拆開焊合之物來自控制董事會(huì )的電池。
- The floppy disk controller reported an error that is not recognized by the floppy disk driver. 軟盤控制器報告軟盤驅動程序不能識別的錯誤。
- The product detects hard disk controllers (SCSI and IDE). 也可檢測硬盤控制器（SCSI和IDE接口）。
- Peripherals are real devices, such as graphics cards or disks controlled by controller chips on the system board or on cards plugged into it. 外設是一些物理設備，比如說圖象卡或者磁盤，它們受控于位于主板或者主板上插槽中的控制芯片。
- These are reserved by the motherboard to control devices such as the hard disk controller and the real-time clock. 這些被對控制裝置,像是硬式磁盤控制器和即時時鐘的母盤保留。
- The hardware of control board is made up of CPU(8 9C51) and CPLD(EPM71 28SLC8). 系統硬件以CPU(89C51)和CPLD(EPM7128SLC8)為基礎.
- This reduces the load on any given disk controller and allows it to handle more requests. 這可以降低某個磁盤控制器上的負載,并能夠處理更多請求。
- No integrated circuit control board, adopts relays to control the sequence. 無集成電路控制板、采用繼電器程序控制。
- Mismatch between the floppy disk sector ID field and the floppy disk controller track address. 軟盤扇區 ID 字符域與軟盤控制器磁道地址不匹配。
