您要查找的是不是：
- The turbine engine has a compressor which turns at high speed. 渦輪發動機有一個高度旋轉的壓氣機。
- It can be driven beth by wind wheel and by low-speed water turbine. 它既可由風力機風輪驅動,又可以由低速水輪機帶動。
- The object parameters change with work point in water turbine governing system. 摘要水輪機調節對象的許多參數都是隨運行工況變化的。
- A turbine engine is propelled by liquid mud pumped into it from the surface. 渦輪機由從地面上用泵打進去的泥漿推動，
- Interactive CAD System for a Gas Turbine Engine 燃氣渦輪發動機計算機輔助設計系統
- Designs and manufactures turbine engine test cells and wind tunnels. 設計生產渦輪發動機測試單元和風洞。
- The work consisted of throwing up embankments and installing water turbine pumps. 這項工作包括快速建起堤壩和安裝渦輪水泵。
- A huge amount of atomized mixture of water and fire-extinguishing agent was spurted to the fire area in high, utilizing speed the high-velocity wake airflow generated by the aviation turbine engine. 利用航空渦輪發動機高速尾氣流作為滅火動力，將大量水和滅火劑混合液霧化后高速?lài)娤蚧饏^。
- Cutaway of the PW 4000112-in(284.48cm) gas turbine engine ,showing fan bypass section. 渦輪發動機剖面圖，展示風扇旁路部分。
- Introduces the boring method and machining effect of the dome and bottom ring of water turbine. 介紹西山水電站水輪機頂蓋底環在立車上同鏜的加工方法及效果。
- The water turbine model test for Geheyan Project was performed in 1991, in Lachine, Quebee, Canada. 隔河巖水輪機模型試驗1991年在加拿大魁北克拉辛市進行。
- Finally this method was applied to the type selection design of water turbine of Nilgiri hydropower station. 最后將該方法應用于尼爾基水電站的水輪機選型設計中。
- The developments of MEMS, Micro Machining technology make it possible to fabricate Micro Turbine Engine(MTE). MEMS技術、微加工技術的發展,使得微型渦輪噴氣發動機(Micro Turbine Engine,MTE)的制造成為可能。
- A Practical CAD System for Preliminary Design of Water Turbine 一個實用的水輪機初步設計CAD系統
- Kawasima T,Iinuma H,Minagawa N.Optical Semiconductor Blade Vibration Monitoring System for Gas Turbine Engine[J]. 胡廣書.;數字信號處理之理論、算法與實現[M]
- Surface fairing is an inevitable operation on reconstructed B-spline surface in reverse engineering CAD modeling. 曲面光顧是反求工程CAD建模中的一項重要且必不可少的工作。
- Nickel base single crystal superalloy is a key material blade for turbine engine blade having high thrust-weight ratio. 鎳基單晶高溫合金是高推重比發動機渦輪葉片的關鍵材料。
- It has been applied Successfully in the parts of 125MW water turbine, such main as valve of speed governor bush and other parts. 并將此工藝成功地應用于125MW水輪機調速器主閥襯套產品零件上.
- Chappell M.An approach to modeling continuous turbine engine operation from startup to shutdown[J].AIAA 91-2373. 王占學;喬渭陽.;基于部件匹配技術的渦扇發動機起動過程數值模擬[J]
- This paper has mainly explained the existing problem and the problem that can t be ignored in distance education of Civil Engineering CAD Course teaching. 本文主要闡述了遠程教育土木工程CAD課程教學中存在的和不能忽視的問題,希望能對該課程教學改革有所幫助。
