您要查找的是不是：
- Rocket motor cases and the specially designed production equipment therefor. 四、火箭發動機的殼體及為其專門設計的生產設備。
- Using pintle technology, a conventional solid propellant rocket motor can provide variable thrust levels, increasing the energy utilizing efficiency and improving the capability of the missile. 喉栓式變推力發動機可實現固體火箭發動機的推力調節，提高能量利用效率，從多方面提升導彈武器的作戰效能，因此具有強烈的軍事需求。
- Four nozzles, canted outboard, split the exhaust of the solid rocket motor into four equal tails. 四個向外傾斜的噴管把固體火箭發動機的排氣流分成四個相等的尾巴。
- There is a rocket motor on the satellite by which the direction of the satellite can be changed if necessary. 在衛星上還有一個火箭馬達,必要時可以用它來改變衛星的方向。
- Rocket motors have many advantages over other forms of propulsion. 火箭發動機比其他推進器有許多優點。
- According to the requirement of pasty propellant rocket motor, a composite plasma igniting plan was adopted. 摘要根據膏體推進劑火箭發動機。
- Motor efficiency can be increased through the use of improved materials, improved heat transfer, more sophisticated control and by cleverer motor designs and configurations. 提高電機效率可以通過許多途徑，包括采用改良了的材料、改進后的熱傳遞、更復雜的控制系統，也可以通過更合理的結構和設計。
- The influence of structure axial vibration on the internal ballistics of solid rocket motor was investigated. 文中研究了固體發動機結構的軸向振動對燃燒室內彈道性能的影響。
- This paper analyzes the motor efficiency test and evaluation methods in detail, and introduces the constitution and hardware principles of test platform. 詳細分析了電動機能效試驗及評價方法，介紹了節能電動機試驗平臺的組成及硬件原理。
- Investigated charring erosive characters of internal insulation of solid rocket motor under flight acceleration. 研究了固體火箭發動機內絕熱層在飛行加速度條件下的炭化燒蝕特性。
- An experimental burst diaphram of 0.011" brass shim stock, installed at the nozzle entrance to increase motor efficiency, caused an overpressurization of the motor. 實驗水管爆裂，連續的0.;011 “黃銅沉股票，安裝在噴嘴的入口，以增加電動機的效率，造成了overpressurization的汽車。
- The thrust vector control(TVC) performance test of solid rocket motor is presented in this paper. 本文介紹了固體火箭發動機水下推力矢量特性試驗。
- A response surface method(RSM) for structure reliability analysis of solid rocket motor(SRM) grain was presented. 發展了一種固體火箭發動機藥柱結構可靠度分析的響應面法。
- The preliminary design data for the k APPA-DX rocket motor is presented in this web page. 初步設計數據的K appa -的DX火箭發動機是在這方面的網頁。
- Buckling analysis on rear dome of solid rocket motor case was studied by means of ANSYS. 用ANSYS軟件對固體發動機殼體后封頭進行了外壓屈曲分析。
- Crose J G.Reliability of solid rocket motor cases and nozzles[R].NTI S,N93-22103. 王松柏.;固體火箭發動機殼體結構的動態可靠性設計[J]
- Finite element method is used in the study of nozzle damping of instable combustion in a solid rocket motor. 應用有限單元法研究固體火箭發動機不穩定燃燒中的噴管阻尼，并用波衰減對比法進行了試驗研究。
- In use, with the flow, changes in lift, submersible pump motor efficiency and a corresponding change in power, the use of submersible pump of the economy and have a certain impact on reliability. 使用中，隨著流量、揚程發生變化，潛水電泵的效率和電動機功率也相應發生變化，對潛水電泵使用的經濟性和可靠性有一定的影響。
- Carbon/carbon composites have become the most ideal materials for nozzles of solid rocket motor (SRM). 摘要C/C復合材料已成為固體火箭發動機(SRM)最理想的噴管材料。
- Space debris made news on March twelfth when a part of an old rocket motor about ten centimeters in size threatened the International Space Station. 空間碎片在三月二十日那天就制造了一個新聞：一個大約十厘米大小的舊火箭馬達威脅著國際空間站。
