您要查找的是不是：
- Clean posts and clamp with wire brush. 用鋼絲刷清刷接線柱和夾子。
- The third patient - use wire brush to brush the gum. 第三位病人患慢性齒齦病-用鋼絲刷刷齒齦。
- The second patient - use wire brush to brush the anus. 第二位病人患慢性痔瘡-用鋼絲刷刷肛門。
- In this case, manual cleaning using a wire brush or scraper is not efficient. 而通過用鋼絲刷、刮刀手動除去這些雜質的效果并不理想。
- Use sand cloth or steel wire brush to clean both tube and cut to bright metal. Steel wool is not recommended. 使用紗布或鋼絲刷清除管道和切割部位,使其金屬表面發光發亮。建議不要使用鋼絲絨。
- Use sand cloth or steel wire brush to clean both ends to a bright metal finish. Steel wool is notrecommended. 使用紗布或鋼絲刷清除管道和切割部位,使其金屬表面發光發亮。建議不要使用鋼絲絨。
- Wire brush potato into the pan-ping,lao cheng Pie, adding a little salt, golden color, crisp texture. 洋芋擦絲，放入平鍋內，烙成餅狀，加入少許鹽水，色澤金黃，口感香脆。
- Do brush the rubber off with a wire brush or fine sandpaper to get out any particles stuck in the sticky rubber. 要用金屬刷子或高質量的砂紙刷掉或擦掉卡在粘膠的任何橡膠顆粒。
- Once back to bare wood, raise the grain by rubbing briskly with a stiff wire brush. 一旦變回光禿的木材，用堅硬的鋼絲刷輕快地摩擦使木紋隆起。
- Use the sandpaper or wire brush to thoroughly clean the copper sheeting, so that any sulphide or other light corrosion is removed. 使用砂紙或鋼絲刷，徹底清潔銅薄膜，因此，任何硫化物或其他輕腐蝕被刪除。
- Wire brushing is another commonly used cleaning mechanism. 鋼絲刷是另一個常用的清潔機制。
- Traditionally, the removal method has been sanding, scraping and wire brushing. 傳統的清除方法是打磨、刮削和用鋼絲刷刷洗。
- Remove corrosive salts, chalk marks, soil or other contaminants and foreign matter by brushing the steel with a stiff fiber or wire brush or a combination of both. 用硬纖維、鋼絲刷或二者之一擦拭鋼材表面除去附著的銹鹽、粉斑、油跡及其他污染物。
- Suitable eye protection must be worn when using wire brushes, scrapers or chipping hammers. 當使用鋼絲刷、刮刀或鑿錘時必須佩戴恰當的眼防護用品。
- We should brush our teeth at least twice a day. 我們每天應該至少刷兩次牙。
- Brush off the fuzz that has blown on. 把被風吹上去的絨毛刷掉。
- oval steel wire brush without handle 無柄橢圓鋼絲刷
- A kite dangles from a telephone wire. 一只風箏懸掛在電話線上晃來晃去。
- Removal of loose rust, loose mill scale and loose paint by chipping, scraping, sanding and wire brushing to a specified degree. 通過手動工具削、刮、刷去松散的銹跡、氧化皮、漆皮,以達到指定等級。
- Removal of loose rust, loose mill scale and loose paint by power tool chipping, decaling, sanding, wire brushing and grinding to a specified degree. 用電動工具削、磨、刷去不牢固的銹跡、氧化皮、漆皮,以達到指定等級。
