您要查找的是不是：
- myocardial wall thickness 心肌壁厚度
- Note that the thickness of the myocardial wall is normal superiorly, but inferiorly is only a thin fibrous wall. 盡管心肌壁的厚度正常，但內部?jì)H為薄弱纖維。
- Range Min and Max.-OD with wall thickness. 范圍分鐘和最大Od以壁厚度。
- The backing of bearings with greater wall thickness is not copper-plated. 軸承壁較厚的軸承,其背襯不鍍銅。
- APACO processes Hardboard, MDF or Chipboard up to a wall thickness of 18mm. 櫥柜/壁柜/櫥柜門板/人造石廚房臺面加工制作.
- DTI could accurately present myocardial wall contraction and relaxation function. DTI能定量測定室壁運動速度,可更精確反映收縮和舒張功能變化。
- The forecasted wall thickness was conformed to the experimental result. 預測的壁厚和實驗結果吻合得很好。
- Tissue Doppler imaging is a new echocardiography techniques which can quantitate myocardial wall motion. 多普勒組織成像技術是一項應用多普勒原理分析心肌組織運動的一項超聲新技術。
- End connection including wall thickness of connecting pipe if weld end and any special flange facings or finishes. 連接方式,如果是焊接端口和任何法蘭面或表面,則包括連接管道的壁厚。
- What is the foundry's checking frequency for control of core shift and wall thickness? 工廠檢驗芯偏移以及壁厚的頻率?
- DTI technique could be used to quantitate the postischemic myocardial wall motion in real time and could identify the viable myocardium sensitively and accurately when combined with DSE. DTI技術可實時定量反映缺血后心肌的室壁運動信息 ,與小劑量多巴酚丁胺負荷試驗相結合 ,可準確判斷缺血后心肌狀態
- The tube deformation characteristics on ASSEL mill are deformation concentrating at shoulder and wall thickness in rolling zone increasing. ASSEL軋管機具有臺肩集中變形、碾軋段壁厚增厚等特點。
- The wall thickness of a 1-litre bottle preform is 3mm. The cooling time is 10.8s. 1公升的礦泉水瓶瓶坯壁厚3mm，冷卻時間便占10.;8秒。
- Background and objectivesStrain rate imaging (SRI) or strain imaging (SI) is a new assessment of regional myocardial wall deformation based on Doppler tissue velocity imaging (TVI). 應變率成像(SRI)與應變成像(SI)是在多普勒組織速度成像(TVI)基礎上發展起來的以心肌形變?yōu)檠芯繉ο蟮某曅录夹g(shù)。
- The wall thickness of a 5-gallon bottle preform is 8mm. The cooling time is 76.8s. 5加侖瓶瓶坯壁厚8mm，冷卻時間是76.;8秒。
- Conclusions DTI technique could be used to quantitate the postischemic myocardial wall motion in real time and could identify the viable myocardium sensitively and accurately when combined with DSE. 結論DTI技術可實時定量反映缺血后心肌的室壁運動信息，與小劑量多巴酚丁胺負荷試驗相結合，可準確判斷缺血后心肌狀態。
- When chilled water is used to cool the mould, cycle time is related to wall thickness as follows. 在冰水冷卻的條件下，冷卻時間與壁厚有以下的關系。
- AIM To determine the normal values for tissue velocity,displacement,strain and strain rate for the regional myocardial wall segments in the left ventricular and the relation of these values with age. 目的觀察左室節段性心肌組織速度、位移、應變及應變率的正常值以及它們與年齡的關系。 方法對132例健康志愿者行組織多普勒檢查,測量左心室各壁各節段心肌的峰值速度、組織追蹤、應變及應變率。
- The aorta wall thickness (AWT) was measured wiht B-mode echocardiography in 128 patients with primary hypertension. B型超聲心動圖下測量了128例高血壓病患者主動脈壁厚度（AWT），同時檢測了血脂指標。
- Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness. 高速離心鑄造,組織致密,無砂眼、夾渣,表面光滑、壁厚均勻。
