您要查找的是不是：
- mucus flow rate 粘液流速
- The crystallinity of polypropylene with different melt flow rate (MFR) are measured by X-ray method. 用X射線法測定了不同熔體流動速率下聚丙烯材料的結晶度。
- The melt flow rate (MFR) impacting to crystallinity and properties of polypropylene (PP) was studied. 研究了聚丙烯(PP)熔體流動速率(MFR)對結晶度及性能影響。
- The aim of this dissertation was to develop propylene copolymer TJPP-2027 with high melt flow rate(MFR) and impact strength. 本工作的主要目標是開發生產高流動性抗沖擊聚丙烯注塑料TJPP-2027。
- Consistent flow rate from nebulizer to nebulizer. 在霧化器間提供持續穩定的流通速率。
- The effects of the agent system on the modification were investigated by testing melt-strength,melt viscosity,the changes of melt flow rate(MFR) and gel content. 通過熔體強度、熔體黏度測試和熔體流動速率(MFR)、凝膠含量的變化研究了試劑體系對接枝交聯改性的作用。
- According to NIH-chronic prostatitis symptom index (NIH-CPSI), maximal urinary flow rate (MFR) and average urinary flow rate (AFR), compared the effect of two groups. 根據美國國立衛生研究院慢性前列腺炎癥狀評分(NIH-CPSI)、最大尿流率(MFR)及平均尿流率(AFR)比較兩組療效。
- Nasal odor may result from sinusitis or conditions that impede or block mucus flow. 氣味可能來自鼻竇炎，以及各種會(huì )妨礙或阻塞黏液流動的問題。
- The results show that the elastomeric MMA copolymer R,which is partially compatible with PC,is a very efficient toughening agent and improves the melting flow rate(MFR) for PC. 它是PC非常有效的增韌劑,同時,可以改善PC的加工流動性,二者共混可望開發出有重要實際意義的塑料合金。
- The antioxidant presented excellent performance by the tests of oxidation induction time (OIT)，melt flow rate (MFR)，tensile strength and elongation when used in PP. 將該產品應用于聚丙烯中，氧化誘導期、熔體流動速率、拉伸強度和斷裂伸長率測試結果表明其具有良好的抗氧作用。
- Affect the melt flow rate and the cooling speed. 會(huì )影響熔體的流動性和冷卻速度。
- Possibility to control the flow rate by Pump. 由蠕動泵調節鹽溶流量。
- Often used to treat allergies, antihistamines aren't the best for colds because they dry up nasal membranes and slow the mucus flow that helps rid your nasal passages of germs. 它通常用于過敏的治療，因其干燥鼻黏膜、降低粘液流動而阻止細菌經鼻排出，不適合用來應對感冒。
- Typical maximum system flow rate (7.5 feet/sec. 標準最大系統流量為7.;5英尺/秒。
- The HTA flow rate has two-faced influences on them. 熱風流量對其影響呈現兩面性。
- Either flow rate is insufficient or CPU is overoccupied. 不是流量不夠用就是CPU資源占用過多!
- The results show that the international prostaric symptoms score (IPSS) and residual urine decreased significantly (P<0. 001),maximum and average urinary floW rate (MFR, AFR) increased significantly (P<0. 01) after operations. 結果術后前列腺癥狀評分降低，最大尿流率及平均尿流率增加，殘余尿減少。 手術時間短，術中術后出血少，操作簡單，對患者全身影響小。
- The effects were evaluated mainly by urodynamic data including maximum flow rate(MFR), average flow rate(AFR), voiding volume(VV), female urethral syndrome score (FUSS) and quality of life (QOL). 以自由尿流率的主要參數如最大尿流率(MFR)、平均尿流率(AFR)、排尿量(VV)和尿道綜合征癥狀評分(FUSS)、生活質量評分(QOL)為療效指標觀察治療效果。
- Detection wavelength was 260 nm,flow rate 0.7 mL/min. 檢測波長2 6 0nm ; 流速為 0 .;7mL/min。
- An improved OSC method is proposed and an application of this method combined with partial least squares (PLS) method to soft sensing of polypropylene melt flow rate (MFR) is demonstrated. 提出一種改進的OSC方法，并將該方法結合部分最小二乘(PLS)方法用于聚丙烯熔融指數軟測量建模。
