您要查找的是不是:
- Connect vacuum line to EGR valve. 將真空管路連接到EGR閥。
- Only replace EGR Valve or include sensor?How much?Is it easy to DIY? 有門,老wu,老許等大俠, I'd better to replace it or clean it?
- Check for signs of leakage or cracked surfaces at both ends of tube, exhaust manifold and EGR valve. 檢查兩個管的末端,排氣歧管和EGR閥是否有泄露或表面有裂痕。
- The linear EGR valve contains a single electric solenoid that is operated by the PCM. 線性EGR閥內僅裝有一個電磁閥,這個電磁閥由PCM控制。
- Forward needle valve positions for easy access. 針形閥位置提前,便于接近。
- The output signal of the turbine host controls was delivered to DEH for adjusting valve position. 汽機主控輸出信號送DEH,控制調門開度。
- However, the range it can control is small and itscontrolling freedom is limited.The mechanism of the second one is to switch on oroff the EGR valve through controlling the vacuum. 氣電式系統是通過控制真空管路的通/斷或者真空度,來控制EGR閥的開/關,由此控制在循環的廢氣流量。
- This all-plastic kit, permanently mounted on a valve, may be locked in the on or off valve position. 這種全塑料組件永久性安裝在閥門上,可能被鎖定在閥門開啟或關閉的位置上。
- Dome style beacon with high visibility green/red indicator for improved viewing of valve position. 拱形燈塔式高可視性綠/紅指示器改善了閥門位置的觀察效果。
- The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting. 主閥軸配置一個內軸,適用于雙重調節止動記憶和閥門位置設置。
- Reel and release drill line, change direction of changing valve position can be changed the direction of motion. 收繩和放繩,改變手動換向閥的位置即可改變運轉方向。
- The swing check valve can also be mounted to the vertical position, provided the disc should not reach the valve position. 旋轉式止回閥也可以安裝在垂直位置,此時閥瓣應該無法達到閥門的位置。
- exhaust pressure modulated EGR valve 排氣壓力控制型廢氣再循環閥
- Maintaining the original technics of ethanol rectification tower,a valve position controller(VPC)is added to the system. 乙醇精餾塔的浮壓控制方法是一種新的節能控制方法,在保持原有工藝不變的情況下,增加一個具有純積分作用的閥位控制器(VPC)。
- vacuum and spring operated EGR valve 真空和彈簧控制型廢氣再循環閥
- An internally mounted, solid state positioner board accurately controls valve position from open to close. 內部安裝的固體狀態定位器主板能夠精確控制閥門從開啟到關閉的各種位置。
- Provides an easy visible indication of the relative disk position. Used when the valve is mounted in high or out-of-reach locations, but frequent monitoring of the valve position is required. 為相關的閥瓣位置提供便于觀察的指示標志。用于當閥門安裝在高處或無法靠近的地方時,但是有需要經常觀察閥門開啟位置的情況。
- Positioner - Attachment for either electric or Pneumatic actuators which provides automatic modulating control of the valve position from open to closed. 定位器-可附加在電動或氣動執行器,對閥門位置從開啟到關閉進行自動調節控制。
- The control system of the smart hydraulic valve positioner is introduced based on ARM microcontroller. 介紹了一種基于A(yíng)RM的智能液壓閥門定位器控制系統的基本組成、系統結構、硬件設計、軟件流程以及控制策略。
- The wood is held in position by a clamp. 木頭用鉗夾固定住了。