您要查找的是不是：
- Operation From DC Power Supply: Batteries. 使用直流電源：干電池。
- This paper base on the design of 28V600A DC power. 介紹以28V600A直流電源設計為背景。
- CBF series are able to be applied to large current DC power line. CBF系列的晶片能夠應用于大電流的直流電源信號線.
- AC or DC Power: 500mA peak start-up current for 10 msec. 交流或直流電源： 500mA峰值啟動電流為10毫秒。max.;馬克斯。
- Specially designed for suppressing DC power line disturbances. 專為抑制直流電源線干擾而設計.
- The 125 volt DC power system supplies power to the low draft trip switches. 應翻譯為125伏特直流電源系統為低負壓跳車開關供電。
- A new method for power measurement of audio frequencies is introduced. 介紹了一種音頻范圍內功率測量的新方法。
- If necessary,plug the DC power supply cord into the WinAIP Interface Box and the power supply into an AC outlet. 如果必要，將 DC 電源線插入 WinAIP Interface Box，并將電源插到 AC 插座上。
- Design of the Power Measurement System Base on Single-Chip Microcomputer for EV Storage Batteries. 基于單片機的EV動力蓄電池組電量計量系統的設計。
- On the condition without DC power, the SCR could be used to realize dynamic braking. 在無法取得直流電源的情況下，利用可控硅元件，也可實現能耗制動。
- Optical potential mutual inductor is a new kind of senser used in electric power measurement system. 光電式電壓互感器是一種用于電力測量系統的新型傳感器。
- This dc power supply offers high performance and precision measurements in a one-box solution. 這個直流電源供應器以單機解決方案,提供了高效能與精確的量測。
- The ideal power amplifier would be supplied pure DC power ONLY from the power supply. 理想的功放是純直流電源供應只是供電。
- This method can be used to design reactive power measurement equipment for power computation and attemperment automatization in electric power system. 該方法可用于電力系統中電能計量、調度自動化等領域的無功功率測量裝置的設計。
- If necessary, plug the DC power supply cord into the WinAIP Interface Box and the power supply into an AC outlet. 如果必要，將 DC 電源線插入 WinAIP Interface Box，并將電源插到 AC 插座上。
- This paper presents a numerical algorithm for power measurement in nonsinusoidal conditions and studies the application in Virtual Instrument. 介紹了一種可用于非正弦情況下功率測量的數字算法,并研究了在虛擬儀器中的應用。
- When applied with DC power supply,the tool is compatible with single conductor cable,used to log GR+CCL+CBL. 在直流供電時 ,該儀器可配接單芯電纜 ,完成GR +CCL +CBL固放磁測井。
- The objective of DC power modulation is to damp the relative swing of angle and frequency of the two areas from COI. 直流輸電線路功率調制的目標是阻尼區域COI功角和頻率間的相互振蕩。
- Use a rubber grommet when passing the DC power cable through a metal plate to prevent a short circuit. 當將直流電源電纜穿過金屬板時，請用橡膠皮圈進行隔離，以防放生短路。
- DNB power measurement system gets the value and distribution of power before injecting the particles to TOKAMAK, so that the DNB system can be easily controlled. 而DNB功率測量是在DNB向TOKAMAK注入粒子前獲取中性束流的功率大小及其分布情況,以便施行有效的控制。
