您要查找的是不是：
- Tables of computed altitude and azimuth H.O. 高度方位表。
- We have a plan and are “on azimuth. 我們有一個計劃并在“對準方位?！?/li>
- Magnetic azimuth bearings are approximate. 磁性方位角軸承是近似。
- The Azimuth value must be between 0.0 and 360.0. 地平經度值必須介于0.;0和360
- This azimuth motion is known as the ballistic deflection error. 這種繞方位軸的運動稱為沖擊偏差。
- This method requires a near-field source whose azimuth is known. 該方法要求一個方位已知的近場校正源。
- Such trilateration is liable to rapid accumulation of azimuth error. 這樣的三邊測量鎖的方位誤差容易迅速積累。
- The length and azimuth of one side at each junction point is first decided on. 每個交叉點上的一條邊的長度和方位角是一開始就決定的。
- The dial index will rotate in azimuth, giving an incorrect heading reading. 讀數示標會(huì )繞方位軸轉動，給出不正確的航向讀數。
- Azimuth and elevation are important properties for aural presentation. 方位和高度是音頻的重要屬性。
- The azimuth preprocess circuit implementation and its result are presented. 文中給出了電路應用和實現結果。
- The altazimuth goes up-down (moving in altitude) and side to side (azimuth). 地平式的則是上下、左右運動。
- An analysis of results in various miss distance and miss azimuth was made. 分析了不同脫靶角和不同脫靶量彈目交會(huì )信號;
- In Bistatic spotlight SAR design, azimuth resolution is a key factor. 摘要在雙站聚束式合成孔徑雷達系統設計中，分辨率是一個關鍵的參考因素。
- Inclinometer is an Instrument testing drift angle and azimuth of drift hole. 測斜儀是一種測定鉆孔傾角和方位角的儀器。
- Wright J W.Directional drilling azimuth reference systems[R],IADC/SPE 17212. 李宏偉;李淑偉.;井口坐標系及地磁參數的確定[J]
- Azimuth, in Ellipsometry - The angle measured between the plane of incidence and the major axis of the ellipse. 橢圓方位角-測量入射面和主晶軸之間的角度。
- The azimuth from the launch point to the target was about 346 deg., or 15 deg. west of due north. 有關消息來源稱，發射點至目標的方位角約346度，或者說北偏西15度。
- An instrument that measures the altitude and azimuth of celestial bodies,used in navigation. 用來測量天體的高度和角度的裝置,通常用于航海。
- The error in azimuth must be controlled by astronomical observations for azimuth(and longit ude). 方位誤差必須觀測天文方位角（及經度）來控制。
