您要查找的是不是：
- 設計過程中形位公差的合理選注Reasonable Choice for Geometric Tolerance When Designing
- 未注公差Unmarked Tolerance
- 計算機輔助形位公差大小的最優分配Computer Aided Optimal Allocation of Geometric Tolerance Values
- 普通級公差符合2002年的ISO 492標準。The Normal tolerances are in accordance with ISO 492:2002.
- 符合manage
- 未注日期支票undated cheque
- 形位公差form and position tolerance
- 注to inject
- 公制軸承的標準公差和P5級公差符合ISO 492-2002。The Normal and class P5 tolerances for the metric bearings conform to ISO 492-2002.
- 各項指標符合GB/T500P.60.80.81-2003，GB11678-89標準，并通過美國FDA注冊認證。GB / T500P. 60. 80. 81- 2003 meet targets, GB11678-89 standards ,certification and registration by FDA .
- 未注日期的支票undated check
- 這位this (person)
- 未命名unnamed
- 不符合fall short of
- 從未never
- 普通級、P6級和P5級的公差符合2002年的ISO 492標準。The tolerances for classes Normal, P6 and P5 are in accordance with ISO 492:2002.
- 基于變動幾何約束網絡(luò )的形位公差設計理論與方法的研究Study on Theories and Methods of Geometric Tolerance Design Based on Variational Geometric Constraints Network
- 未注焊縫焊角高度K均為焊件中薄壁的厚度。All the size of fillet welds K are the thickness of the wall except those marked.
- 形位morpheme
- 英制軸承的常規公差符合英國標準BS 292:Part2:1982,并帶符合ISO 5753:1991標準的常規徑向內部游隙。Inch bearings are manufactured to Normal tolerances, according to standard BS 292: Part 2:1982 and with Normal radial internal clearance, which conforms to ISO 5753:1991.
